Aqua Cooler M2F Owner's manual

Type
Owner's manual

Aqua Cooler M2F is a water cooler manufactured by Aqua Cooler Pty Limited, an Australian company that has been in the business since 1946. The M2F model is designed to provide clean, safe, and fresh-tasting water for various use cases, including offices, homes, and other commercial establishments.

Here are some of the key capabilities and features of the Aqua Cooler M2F:

  • Water Filtration: The M2F comes equipped with a proprietary carbon-block filter that effectively reduces chlorine, taste, and odor from the water, ensuring that you get pure and refreshing water every time.

  • Temperature Control: The M2F has a pre-set thermostat that maintains the water at an optimal temperature of 10 degrees Celsius, providing you with cool and refreshing water on demand.

Aqua Cooler M2F is a water cooler manufactured by Aqua Cooler Pty Limited, an Australian company that has been in the business since 1946. The M2F model is designed to provide clean, safe, and fresh-tasting water for various use cases, including offices, homes, and other commercial establishments.

Here are some of the key capabilities and features of the Aqua Cooler M2F:

  • Water Filtration: The M2F comes equipped with a proprietary carbon-block filter that effectively reduces chlorine, taste, and odor from the water, ensuring that you get pure and refreshing water every time.

  • Temperature Control: The M2F has a pre-set thermostat that maintains the water at an optimal temperature of 10 degrees Celsius, providing you with cool and refreshing water on demand.

AQUA COOLER PTY LIMITED
A Q U A
A.B.N. 13 245 994 351
A.C.N. 002 911 524.
161 ORCHARD ROAD
CHESTER HILL NSW 2162
Ph: (612) 9721 9300
COOLER
Fax: (612) 9743 9244
MANUFACTURERS OF
WATER COOLERS AND
INDUSTRIAL CHILLERS.
OWNERS MANUAL
CONTENTS:
INSTALLATION INSTRUCTIONS
FILTER INFORMATION
WARRANTY FORM
CONTACT DETAILS
INSTALLATION DIAGRAMS
FOR MODELS M2F, M3F, M4F, M5F, M10F, M11F
Thank you for choosing to purchase your new Aqua Cooler water cooler
and we hope it provides many years of trouble free service.
All the information in this booklet is designed to help you. Please take a
moment to read carefully.
Please complete the warranty form at the rear of this booklet and return to
us for registration.
As a proud Australian manufacturer, we take pride in the products we sell
and warrant to ensure you are fully satisfied with the product and our long-
term support.
INSTALLATION INSTRUCTIONS
FOR THE INSTALLER
To ensure you install the unit easily and correctly, PLEASE READ THE FOLLOWING
INSTRUCTIONS BEFORE STARTING INSTALLATION. CHECK YOUR
INSTALLATION IS IN COMPLIANCE WITH PLUMBING, ELECTRICAL AND
OTHER APPLICABLE CODES. There are some simple diagrams to assist you in the
installation of the cooler on the last sheet of this booklet. After installation, leave these
instructions inside the cooler for future reference.
IMPORTANT INFORMATION ABOUT YOUR WATER COOLER
1. The water cooler is not intended for outdoor use.
2. All service work to be carried out by authorised Aqua Cooler service agents only.
Failure to do so will void the warranty on the water cooler.
3. Warranty will also be voided if installation is not carried out as detailed in the Aqua
Cooler installation instructions.
4. The thermostat is pre-set and non-adjustable for 10 degree water under normal
conditions.
5. The coolers are tested to meet accreditation standards. This cooler meets the
AS/NZS 1044:1995 EMC testing standards for electrical interference. They meet
the TYPE test MP52 plumbing standards for back flow prevention and they are
tested to meet IEC 60 335-2-24:97 plus amendments for electrical safety.
INSTALLATION
If you would like Aqua Cooler to install the system for you, please contact us at the
number on the cover of this booklet.
1. Ensure proper ventilation by allowing 75mm clearance on each side of the cooler.
2. Minimum water pressure is 100 kpa and maximum is 700 kpa. If the water pressure
exceeds 700 kpa a pressure limiting valve should be fitted. These are an optional
extra and are available through Aqua Cooler, if needed.
3. Install a 40 mm waste trap onto the waste outlet on the rear of the cooler - not
supplied.
4. Water in connection is secured via a ½” kinko nut and olive into the stainless
connection on the rear of the unit as per the diagram in this booklet. It is
recommended that a ½” shut off valve is installed at this point for the purposes of
future maintenance.
5. Turn on water supply and hold down bubbler and purge system of air until a steady
stream of water comes from the tap.
6. The tap needs to be adjusted for the correct water flow in relation to the local water
pressure. On the side of the tap is an inner and an outer screw. Once you have
established a steady water flow adjust the INNER screw until the stream is in the
centre of the stainless steel top.
7. Check all connections for water leaks.
8. Plug the cooler into the building electrical supply. The unit will start automatically.
THE FILTER
In order to provide you with the performance and the personal satisfaction you expect
from AQUA COOLER, we have fitted the latest in water purification. At AQUA
COOLER we call it the smart choice. Our system provides clean, safe and fresh tasting
water while looking after your health.
The filter is a proprietary, carbon-block filter of greater density. No activation is
required.
The filters will reduce chlorine, taste and odour.
A choice of cartridges is available for differing water conditions.
TO CHANGE THE FILTER
AQUA COOLER CAN PROVIDE REGULAR FILTER CHANGES FOR YOU.
PLEASE CALL 1800 649 233 TO ARRANGE THIS SERVICE.
Or
We can mail a detailed filter change instruction when you order your next filter.
WARRANTY FORM AND CONTACT DETAILS
Aqua Cooler Pty Limited warrants this appliance to the first purchaser as follows and
subjected to the stated conditions.
1. Any defect in the appliance occurring within the first twelve months from the date
of purchase will be rectified free of charge by Aqua Cooler Pty Limited or any
authorised independent service agent.
2. Aqua Cooler Pty Limited agrees to replace any parts of the hermetically sealed
refrigeration system that becomes inoperative in the following four years following
the first years' full warranty. This limited warranty covers the compressor,
condenser, and interconnecting refrigeration pipe-work. It excluded relays,
overloads and all other components of this appliance. This limited warranty does not
include service, labour costs or any pick up and/or freight charges.
CONDITIONS OF THIS WARRANTY
1. The appliance must be installed in accordance with the manufacturers installation
instructions.
2. The warranty extends only to repairing or replacing any components that proves to
be defective in material or workmanship.
3. The warranty does not cover defects occasioned by misuse, alteration or accident.
COOLER
FOR ANY CLAIM UNDER THIS WARRANTY PLEASE CONTACT
AQUA COOLER PTY LIMITED
Phone toll free: 1800 649 233 OR Fax: (02) 97439244
Thank you for your custom and we hope that the appliance gives many years
of fault free operation.
To enable us to register your warranty and provide best possible service
should a problem occur, we recommend you fill out the section below
and return it to us immediately.
WARRANTY AND SERVICE REGISTRATION FORM
Please fill in this form and mail it to: AQUA COOLER PTY LIMITED
Or copy and fax it to us on 161 ORCHARD ROAD
(02) 9743 9244. CHESTER HILL NSW 2162.
Company name:…………….………………………………………………………….
Contact name:…………………………….. Ph ( )…………………………………
Address:………………………………………………………………………………
Suburb:……………………………………….Postcode:………………………………
Model number:……………………………….Serial number:…………………………
Date of purchase:…………………………….
Purchased from:………………………………………………………………………..
…………………………………………………………………………………………
AQUA COOLER PTY LIMITED
PROUDLY AUSTRALIAN
SINCE 1946
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Aqua Cooler M2F Owner's manual

Type
Owner's manual

Aqua Cooler M2F is a water cooler manufactured by Aqua Cooler Pty Limited, an Australian company that has been in the business since 1946. The M2F model is designed to provide clean, safe, and fresh-tasting water for various use cases, including offices, homes, and other commercial establishments.

Here are some of the key capabilities and features of the Aqua Cooler M2F:

  • Water Filtration: The M2F comes equipped with a proprietary carbon-block filter that effectively reduces chlorine, taste, and odor from the water, ensuring that you get pure and refreshing water every time.

  • Temperature Control: The M2F has a pre-set thermostat that maintains the water at an optimal temperature of 10 degrees Celsius, providing you with cool and refreshing water on demand.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI