Whirlpool AKZ 312 IX Owner's manual

Brand: Whirlpool

Model: AKZ 312 IX

Type: Owner's manual

This manual is also suitable for

AKZ 312

PRODUCT DESCRIPTION SHEET

DE AT BE NL

5019 310 53031

0 Off

Oven light

STATIC FUNCTION

Use when all the food is on the same runner level.

- Pre-heat the oven to the required cooking temperature and place the food inside as soon as the red thermostat

indicator light switches off.

- Ideally, the shelf should be on the second runner level when using the static function.

STATIC FUNCTION + FAN

Use this function when cooking on two different levels.

- Oven preheating is not necessary (except for pizzas and focaccia).

- Switch the position of the dishes in the oven 10 minutes before the end of cooking time.

- Remove the cooked dish and, if necessary, continue cooking the other one for as long as required.

GRILL FUNCTION

Use the grill function to cook small pieces of meat (steaks, sausages) and for making toasts.

- The oven door must be closed during the cooking cycle.

- Preheat the grill for about 5 minutes.

- Arrange the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce

smoke and fat spatters.

- Turn over the meat about half-way through cooking time.

GRILL + FAN FUNCTION

Ideal for large joints, pork, chicken and roast beef.

- The oven door must be closed during the cooking cycle.

- Place the meat on the grid with the drip tray underneath. Pour water in the drip tray to cover the bottom to reduce

smoke and fat spatters.

- Turn over the meat about half-way through cooking time.

DEFROST FUNCTION

Ideal for thawing frozen food to room temperature.

- The food should be inserted in the oven in its wrapping to prevent it from drying out

Turn the selector knob to the required symbol.

The oven light switches on.

• Turn the thermostat knob clockwise to the required temperature.

The red thermostat indicator light switches on.

• When the required temperature is reached, the red thermostat indicator light switches off.

End of cooking cycle:

• Return the knobs to the OFF position (0 - •).

OVEN

First

Last

First...Last : Runner positions

1. Control panel

2. Cooling fan (not visible)

3. Upper heating element

4. Grill element

5. Oven light

6. Fan

7. Lower heating element (not visible)

8. Oven door hinges

9. Oven door

Accessories :

• Grid

• Baking tray

CONTROL PANEL

1. Oven functions selector knob

2. Oven thermostat knob

3. Thermostat indicator light

4. Control knob for front, left cooking zone*

0 1 ...10

5. Control knob for rear, left cooking zone*

0 1 ...10

6. Control knob for rear, right cooking zone*

0 1 ...10

7. Control knob for front, right cooking zone*

0 1 ...10

8. Cooktop “ON” indicator light

*The cooktop control knobs are not interchangeable.

After cleaning or servicing, they must be returned to

their original positions.

The cooling fan can run at two speeds:

1) Full speed

2) Reduced speed

The fan speed depends on the temperature of the oven

and/or cooktop.

After the oven and/or the cooktop switch off, the

cooling fan may, however, continue to run for a

certain time to ensure proper cooling.

Important: An optional kit consisting of an oven door

glass and of relevant mounting components, is

available by the After-Sales Service. The use of the kit

reduces the temperature of the outer oven surface and

is strongly recommended if there are kids in the house.

Code N°: 4819 310 39186.

OVEN FUNCTIONS

SWITCHING THE OVEN ON

5019 310 53031

The cooktop control knobs are marked with a numerical scale corresponding to different power settings, and a series

of function symbols.

KEEP WARM FUNCTION

This function uses a low power setting so that food can be kept warm when cooking is finished.

How to operate:

1. Turn the knob to .

2. To deactivate the Keep Warm function, change the knob position.

DUAL ZONE FUNCTION

(DEPENDENT ON MODEL)

This function is available on the front left and rear left cooking zones. The dual-zone function extends the heated

area of the cooktop so that you can use large, oval or rectangular pans.

How to operate:

1. Turn the knob to and wait for the residual heat indicator for the chosen hotplate to start flashing.

2. Select the required power by turning the knob anti-clockwise. The residual heat indicator remains lit to show that

the cooktop is switched on.

3. To deactivate the function return the knob to “0”.

FAST BOILING FUNCTION

This function makes it possible to bring water to the boil fast; the Fast Boiling function remains active for a preset

time. Once the preset time has elapsed, the cooktop returns automatically to maximum power level. The Fast Boiling

function can be activated also once you have already started cooking.

Warning: Make sure you have placed the pan on the cooking zone before activating the fast boiling function or the

glass-ceramic surface may be damaged.

Specified performance values for the Fast Boiling function are guaranteed for all types of glass-ceramic cooktops.

How to operate:

1. Place the pan on the chosen cooking zone.

Set

the knob to .

GENTLE HEAT FUNCTION

Can be used to raise dough, soften hard butter from the fridge, keep a baby's bottle or a baby food warm, for yoghurt

making, melting chocolate, etc...

This function is available only when the residual heat indicator light is on.

How to operate:

1. Make sure that the relative cooking zone residual heat indicator light is on.

2. Turn the knob to .

To deactivate the function change the knob position.

COOKTOP FUNCTIONS

This symbol does not correspond to any

cooktop mode; the heating element is not powered.

Whirlpool AKZ 312 IX Owner's manual

Brand: Whirlpool

Model: AKZ 312 IX

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Whirlpool AKZ 312 IX Owner's manual

This manual is also suitable for

Whirlpool AKZ 312 IX Owner's manual

Related papers

Other documents