Atdec TH-PPA-1825 Specification

Category
Projector mounts
Type
Specification
Maximum Weight:
454kg (1000lbs)
TH-PPA-18-25
General Features
Dimensions
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 21.03.13 ©
Pole Compatibility: Colour: Warranty:
1.5”NPT White 10 years
EXTENSION POLE DIMENSIONS
18” (457mm)19.5” (497mm)
OD Ø48mm (1.9”)
35.7 mm (1.4”)
50.8 mm (1.9”)
Ø55mm (2.1”)
Minimum
20”
(508mm)
Maximum
25”
(635mm)
Minimum
21.5”
(546.1mm)
ASSEMBLED POLE DIMENSIONS
Length adjustable in 1”
(25.4mm) increments
Maximum
26.5”
(673.1mm)
ID Ø41.8mm (1.6”)
1.5”NPT
1.5”NPT
1.5”NPT
All threads NPT 1.5”
7.9”
(202mm)
Technical Specifications
18-25” (457-635mm) Adjustable Projector Pole Accessory
  • Page 1 1

Atdec TH-PPA-1825 Specification

Category
Projector mounts
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI