Triton Systems RL331x Traverse Operating instructions

Hello! I am an AI chatbot trained to assist you with the Triton Systems RL331x Traverse Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

SCDU Packer Plate

Installation Instructions

07103-00228 May 16, 2013

Corporate Headquarters:

21405 B St.

Long Beach, MS 39560

Phone: (800) 259-6672

Fax: (228) 868-9445

Copyright Notice

© 2013 Triton. All Rights Reserved. TRITON logo is a

registered trademark of Triton Systems of Delaware LLC.

DOCUMENT UPDATES

May 16, 2013 Original



Page1of9



SCDUPackerPlateInstallationInstructions



InstallationoftheSCDUpackerplaterequires:a#2Phillipsheadscrewdriver(notsupplied).



Step1:Removethe10screwsshownontheleft,rightandbottomsidesofthecassette.(Note:the

bottomfourscrewsaredifferentfromthesixusedonthesides.)





Page2of9



Step2:Removetherail/packerplateassemblyfromthecassette.



Page3of9



Step3:Pullthepackerplatebackandtwisttoremovefromthesiderailasshown.





Page4of9



Step4:Removethespringfromthepackerplateandrail.





Page5of9



Step5:Installthespringonthenewpackerplate.



Page6of9



Step6:Slidethepackerplateontotherail.Stretchthespringovertherollerandrefastento

therail.Repeattheprocessfortheoppositerail.



Page7of9



Step7:Installtherailandpackerplateassemblybackintothecassette.



Page8of9



Step8:Pushtherail/packerplateassemblyforwardasfarasitwillgoasshown.Agapexistson

therearsideoftherailwhenproperlyinstalled.



Page9of9



Step9:InstallthetenscrewsremovedinStep1.Makecertaintousetheproperfourscrewson

thebottomofthecassette.

/

Related papers

Other documents