Signify Wireless Rear View Mirror Owner's manual

Signify
Brand
Signify
Model
Wireless Rear View Mirror
Type
Owner's manual

This manual is also suitable for

AFTER SALES SUPPORT
1300 777 137
Model Number: EA1368
INSTRUCTION MANUAL
With Reverse Camera
Rear View Mirror
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
02
Welcome
Congratulations on choosing to buy a Signify product.
All products brought to you by Signify are manufactured to the highest standards
of performance and safety, and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 1 Year Warranty and customer technical
support line.
This comprehensive instruction manual will provide you with a detailed guide on how to
operate your product and will also assist you in troubleshooting any problems that you
may encounter.
If you have any queries regarding the use of this product, please feel free to phone our
technical support line for some friendly advice. If you are experiencing difculties or
believe that the product may have a technical fault, we will assist you in rectifying the
issue. We can generally solve most problems simply and quickly over the phone, so
please always phone us rst!
We are sure that you will enjoy using this product and you can expect to gain years of
service from this product when it is used and maintained in the correct manner.
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
03
Contents
Welcome 02
Warranty Details 04
General Information and Safety Instructions 05
Product Overview 07
Before First Use 08
Getting Started 09
Installation 10
Power Supply 12
Troubleshooting 13
Other Useful Information 15
Cleaning and Maintenance 15
Storage 15
Responsible Disposal 16
Specication Table 16
AFTER SALES SUPPORT
1300 777 137
04
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
The product is guaranteed to be free from defects in workmanship and parts for a period of 12
months from the date of purchase. Defects that occur within this warranty period, under normal
use and care, will be repaired, replaced or refunded at our discretion. The benets conferred by this
warranty are in addition to all rights and remedies in respect of the product that the consumer has
under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced
if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Rear View Mirror with Reverse Camera
Warranty Details
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
05
RETAIN FOR FUTURE USE
Read this manual thoroughly before rst use, even if you are familiar with this type of product. The
safety precautions enclosed herein reduce the risk of re; electric shock and injury when correctly
adhere to. Please keep this user manual in a safe place along with your purchase receipt, warranty
card and carton for future reference. If applicable, pass these instructions and packaging on to the
next owner of the product. Always follow basic safety precautions and accident prevention measure
when using an electrical product.
1. Read all instructions before using the Mirror/Camera.
2. Never allow children to play with electrical equipment.
3. Do not pull or carry by the cords, use the cords as a handle, close a door on the cords, or pull the
cords around sharp edges or corners.
4. Do not use the Mirror/Camera for anything other than its intended use.
5. Do not allow water or any other liquid to enter the Mirror/Camera housing or its cords.
6. The Mirror/Camera is not intended to be operated by means of an external timer or any type of
separate remote control system.
7. The use of attachments not recommended or sold by the manufacturer is dangerous and may
cause re, electric shock or injury.
8. Do not bend or damage any of the cords.
9. Never operate the Mirror/Camera with wet hands, submerge under water or spill liquids into the
Mirror/Camera.
10. Improper installation may result in the risk of re, electric shock and/or injury to persons.
11. If the Mirror/Camera or its cords are damaged, do not use the unit. Please contact the After Sales
Support line for assistance.
12. The manufacturer and retailer are not responsible for any eventual damages caused by improper
or faulty use.
13. The Mirror/Camera has no user serviceable parts contained within. Do not attempt to repair,
disassemble or modify the Mirror/Camera.
14. This Mirror/Camera is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the Mirror/Camera by a person responsible for their
safety. Children should be supervised to ensure they do not play with the Mirror/Camera.
15. Ensure that all packaging and plastic bags that were included in the Mirror/Camera giftbox are
kept out of reach from children to avoid potential danger of suffocation.
16. Never block the ventilation holes and openings that can be found on the and back of the Mirror.
These ventilation holes have been specically included in the design of the Mirror to assist the
product to cool down and to prevent overheating.
General Information and
Safety Instructions
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
06
17. Be extremely careful when unpacking or relocating the Mirror/Camera. Ensure that the Mirror/
Camera is not dropped, bumped or has excessive force applied to it. Impacts such as these can
damage the product and its internal components.
18. Keep the unit away from heat sources and/or prolonged direct sunlight. See the “Managing the
Mirror/Camera During Summer” section on page 08 for more information.
19. Do not install the Mirror/Camera and any of its cords where it can interfere with the driver’s vision.
This may cause an accident.
20. While cleaning the inside of the car, do not spray water or wax directly onto the product. It can
cause re, an electric shock, or malfunction.
21. Clean the lens of the Camera on a regular basis as this may affect the clarity of the image it
produces.
22. Do not leave the Mirror/Camera unattended during operation.
23. Do not solely rely on the Mirror/Camera to ensure the path is clear for reversing. Please use your
vehicle's side windows and side mirrors to ensure that the environment is clear of obstacles,
peoples, animals and other hazards.
24. The Mirror/Camera should always be repacked in its original packaging whenever transporting to
prevent any possible damage to the device.
25. If you notice any unusual odours or smoke around the unit, immediately turn your car off and
disconnect the unit from the power source. Failure to do so may result in re or electric shock.
IMPORTANT: To correctly connect the Mirror/Camera to your vehicle, we recommend you use a
licensed auto-electrician. The manufacturer and retailer are not responsible for any shorts, battery
damage, re or other issues arising from incorrect installation of the unit. Install at your own risk.
General Information and Safety
Instructions (cont.)
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
07
Product Overview
Included (not pictured):
1x Instruction Manual and 1x Warranty Card.
A Rear View Mirror B Wireless Transmitter C Wireless Receiver
E Reverse CameraD Power Cable
A
A
B C
D
E
Bottom Fixtures
Decrease Button (Menu Option)
Menu Button (Select between Brightness / Saturation / Screen)
Increase Button (Menu Option)
Top Fixtures
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
08
Prior to using your Mirror/Camera, please read all safety and operating instructions
thoroughly. Please ensure you follow the steps below before using this unit. We recommend
you keep the original packaging for storing your Mirror/Camera when not in use.
1. Unpack the product but keep all packaging material until you have made sure your new Mirror/
Camera is undamaged and in good working order. Plastic wrapping can be a suffocation hazard
for babies and young children so ensure all packaging materials are out of their reach.
2. Remove the twist-ties which are securing the cords. Uncoil the cords and straighten them to
remove any kinks. Do not use the product if the cords are damaged, please call the After Sales
Support Line for further advice.
IMPORTANT: Managing the Mirror/Camera During Summer
• Park in a shady place or an indoor parking lot.
• If an outdoor parking lot is used, park away from direct sunlight.
• If the product is exposed to direct sunlight, allow the product to cool down before use.
• During Summer, the temperature inside the vehicle may rise to above 50°C. In the event of
these extreme heats, please do not store the Mirror/Camera inside the vehicle.
Before First Use
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
09
IMPORTANT: To correctly connect the Mirror/Camera to your vehicle, we recommend you use a
licensed auto-electrician. The manufacturer and retailer are not responsible for any shorts, battery
damage, re or other issues arising from incorrect installation of the unit. Install at your own risk.
Preparing the Rear View Mirror
1. Connect the Rear View Mirror (A) to the Power Cable (D). The black plug on the Power Cable
should be inserted into the red jack of the Rear View Mirror, as shown in Fig. 1.
2. Connect the Rear View Mirror (A) to the Wireless Receiver (C). The yellow plug on the Wireless
Receiver should be inserted into the yellow jack of the Rear View Mirror, as shown in Fig. 1.
NOTE: The white jack of the Rear View Mirror is used to connect to a DVD/GPS device. This is a
completely optional function.
Preparing the Reverse Camera
Connect the Reverse Camera (E) to the Wireless Transmitter (B). The yellow/red plugs on the Wireless
Transmitter should be inserted into the yellow/red jacks of the Reverse Camera respectively, as
shown in Fig. 2.
Getting Started
Fig. 1
Fig. 2
A
E
B
C
D
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
10
Installation
Rear View Mirror Installation
The Mirror is designed to be xed to your vehicle’s current existing rear view mirror. To attach the
Mirror, follow the below instructions.
1. Position the top xtures on the back of the Mirror against the top of your vehicle’s rear view
mirror, as shown in Fig. 1.
NOTE: When positioning the Mirror, ensure there is a secure route for the cables.
2. Slide bottom xtures downwards and push under the bottom edge of your vehicle’s rear view
mirror, as shown in Fig. 2.
3. As soon as you let go of the bottom xtures, they will clamp around the rear view mirror, as
shown in Fig. 3.
The Mirror is now ready to be connected to power (see the “Rear View Mirror Power Supply” section
on page 12 for further information).
Reverse Camera Installation
The Camera is designed to be xed to your vehicle’s rear license plate. To attach the Camera, follow
the below instructions.
1. Remove the two top screws which are securing your license plate to your vehicle, as shown in
Fig. 4.
2. Position the Camera so that the holes of the unit line up with the holes of your license place, as
shown in Fig. 5.
1 2
Fig. 1 Fig. 2 Fig. 3
Fig. 5Fig. 4
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
11
Installation (cont.)
IMPORTANT: Take note of the “Up” sticker on the Camera. If you install the Camera upside down,
the image projected on the Mirror will also be upside down.
NOTE: When positioning the Camera, ensure there is a secure route for the cables.
NOTE: Ensure that the Camera is in a position which will provide you with a clear view when in
use.
3. Use the license plate screws to attach the Camera to the license plate (and the vehicle), as shown
in Fig. 5.
The Camera is now ready to be connected to power (see the “Reverse Camera Power Supply”
section on page 12 for further information).
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
12
Power Supply
IMPORTANT: To correctly connect the Mirror/Camera to your vehicle, we recommend you use a
licensed auto-electrician. The manufacturer and retailer are not responsible for any shorts, battery
damage, re or other issues arising from incorrect installation of the unit. Install at your own risk.
Rear View Mirror Power Supply
Connect to ignition fuse / reverse lights
Connect to ground
Optional: Connect to a DVD/GPS device
Connect to reverse positive supply
Connect to ground
Reverse Camera Power Supply
To supply your Camera with power, it must be connected to the cable of your vehicle’s reversing
lights. The Camera will then be activated every time the reverse gear is selected.
Connect to ground
Connect to reverse lights
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
13
Troubleshooting
Problem Possible Cause Suggested Solution
Flickering screen Low voltage Replace the power source.
Signal interference Install a signal lter.
Blue screen or no
signal
The monitor does not receive a
video signal
1. Check if the Mirror and the
Camera are on the same channel.
2. Check if the receiver and
transmitter are working.
3. Check if the Camera is properly
connected to the Mirror.
AFTER SALES SUPPORT
1300 777 137
14
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
Rear View Mirror with Reverse Camera
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to be returned to the
Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as les stored
on a computer hard drive, telephone numbers stored on a mobile telephone, songs stored on a
portable media player, games saved on a games console or les stored on a USB memory stick)
during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with refurbished
goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only
used where they meet ALDI’s stringent quality specications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your complaint.
Please telephone us on 1300 777 137 or write to us at:
UNCLE BILL’S AUSTRALIA PTY LTD
48B Egerton Street
Silverwater NSW 2128 Australia
1300 777 137
Opening Hours - 9:00am - 4:30pm (Mon-Fri), 9:00am - 3:00pm (Sat)
[email protected]
www.signifyelectronics.com.au
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
15
Other Useful Information
Cleaning and Maintenance
• Before cleaning the Mirror/Camera, ensure your car is turned off.
• The Mirror/Camera is likely only to require regular “dusting” to keep it clean. Use a standard
duster, or dry soft microbre cloth to remove the dust from the Mirror/Camera. Remove dust from
the Mirror/Camera regularly.
• If the Mirror/Camera becomes soiled with anything other than dust on its exterior, clean the
exterior of the Mirror/Camera by wiping over the surface with a slightly damp cloth and then
polish with a soft dry cloth.
• Be careful when wiping over the Mirror/Camera, that you do not apply too much pressure, as
there is a risk that you may break parts.
• Do not use detergents or abrasive cleaners, and do not allow moisture, water or other liquid to
enter the Mirror/Camera.
Storage
This unit is best stored in a cool, dry environment away from bright light and dust.
AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA1368 PRODUCT CODE: 63021 09/2018
16
Other Useful Information (cont.)
Responsible Disposal
At the end of its working life, do not throw this appliance out with your household rubbish. Electrical
and electronic products contain substances that can have a detrimental effect on the environment
and human health if disposed of inappropriately. Observe any local regulations regarding the disposal
of electrical consumer goods and dispose of it appropriately for recycling. Contact your local
authorities for advice on recycling facilities in your area.
Please keep the original packaging carton and materials in a safe place. It will help to prevent any
damage if the product needs to be transported in the future. In the event it is to be disposed of,
please recycle all packaging material where possible.
If you require another copy of this instruction manual, please contact [email protected] to
obtain an electronic copy.
The Rear View Mirror with Reverse Camera has been fully tested and meets all requirements as set
out by the below testing standards:
AS/NZS 60950.1
Specication Table
MODEL: EA1368
DIMENSIONS: Mirror - 28.7 x 3.7 x 7.3cm
Camera - 25.1 x 4 x 2.8cm
NET WEIGHT: Mirror - 245g
Camera - 70g
POWER SUPPLY: DC 12V
WATERPROOF: Camera only
VERSION NO: 1.8
ISSUE DATE: 22nd June, 2018
THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Signify Wireless Rear View Mirror Owner's manual

Signify
Brand
Signify
Model
Wireless Rear View Mirror
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents