Page is loading ...
KOLSOL ELM327 Bluetooth OBD2 Scanner V1.5 ELM327 Diagnostic Tool with Switch modified for
Ford
The KOLSOL ELM327 Bluetooth is a versatile, comprehensive automotive electronics product that
detects vehicles through the OBD2 diagnostic interface and can be used to determine if a vehicle
is faulty. Accurate diagnosis and troubleshooting of fault problems.
ScanMaster-ELM Software Install :
You should follow the steps shown in the pictures below:
Step1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
Step2: Double-click the ScanMaster-ELM_2.1.104.771 icon to start it.
Step3: You will see the following picture and click [Next].
Step4: Select the [I accept the agreement] option and click [Next] button.
Step 5: Select the target location for the installation software.
Step6: Successful installation,there would be a shortcut on the desktop.
Step7: Open the software, set the complete user information.Then click [Continue].
Step8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
Step9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
Bluetooth Connection:
You should follow the steps shown in the pictures below:
Step1: Click [Add a Device] button.
Step2: Select the [ OBDII ] option for the next step.
Step3: [Select a pairing option]-[Enter the device’s pairing code].
Step4: Enter the pairing password 1234 or 0000.
Step5: This device has been successfully added to your computer.
ScanMaster-ELM Software Usage:
Open ScanMaster-ELM software and select the interface type: Blue Tooth;
Click on the [Search Devices] button to see the devices you have searched for;
Click the [Test] button to test.
Test successful.ELM device found.
Choose the language you need.
Click the [Connect] button in the lower left corner to connect the device.
Computer detected interface version V1.5
Read Trouble Codes
Read Live Data Grip
FoCCCus Software Usage:
Open the FoCCCus folder and you will see the FoCCCus icon.
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
These are what you’ll see when the software is running:
/
