Page is loading ...
KOLSOL ELM327 WIFI OBD2 Scanner V1.5 ELM327 Diagnostic Tool with Switch modified for Ford
Highlights:
1.The modified version of the ELM327 converts the HS-CAN and the MS-CAN.
2.It supports all OBD-II protocols.
3.Retrieve Fault Codes (DTCs) and clear Check Engine lights.
4.s
upport FORD models open hidden function.
5.In addition to adding functionality to Ford, the device can also be used as a regular OBD2 /
EOBD diagnostic on a vehicle.
6. Supported System: IOS ,Windows XP, Windows 7, Android, Symbian.
Functions:
1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their
meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL.
3.Display current sensor data, including:
Engine RPM
Calculated Load Value
Coolant Temperature
Fuel System Status
Vehicle Speed
Short Term Fuel Trim
Long Term Fuel Trim
Intake Manifold Pressure
Timing Advance
Intake Air Temperature
Air Flow Rate
Absolute Throttle Position
Oxygen sensor voltages/associated short term fuel trims
Fuel System status
Fuel Pressure
Many others...
Vehicle Coverage:
America
Chrysler, Dodge, Jeep, Ford, Chevrolet, Cadillac, Lincoln, Buick, Hummer, etc.
Asia
Honda, Nissan, Lexus, Toyota, Mazda, Mitsubishi, Hyundai, Kia, Isuzu, Suzuki, Land
Rover, Daewoo, Chery, BYD F3/F0, Infiniti, Subaru, etc.
Europe
Audi, BMW, Citroen, Fiat, Mercedes, Opel, Peugeot, Renault, SEAT, Skoda, Volvo,
Volkswagen, Jaguar, Lamborghini, Maserati, Bentley, Rolls Royce, Porsche, Opel,
Lancia, Mclaren , Ferrari, etc.
Other mainstream models that comply with the international standard obd2 agreement.
Supported Software:
Torque-pro
Dashcmd
ScanMaster-ELM
scantool_net113
Forscan
FOCCCUS
Supported Protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2(5 baud init,10.4Kbaud)
4. ISO14230-4 KWP (5 baud init,10.4 Kbaud)
5. ISO14230-4 KWP (fast init,10.4 Kbaud)
6. ISO15765-4 CAN (11bit ID,500 Kbaud)
7. ISO15765-4 CAN (29bit ID,500 Kbaud)
8. ISO15765-4 CAN (11bit ID,250 Kbaud)
9. ISO15765-4 CAN (29bit ID,250 Kbaud)
Specifications:
SSID: WiFi OBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches
ScanMaster-ELM Software Install :
You should follow the steps shown in the pictures below:
Step1: Open the ScanMaster-ELMv2.1 folder in the Computer-DVD/CD-RW Drive.
Step2: Double-click the ScanMaster-ELM_2.1.104.771 icon to start it.
Step3: You will see the following picture and click [Next].
Step4: Select the [I accept the agreement] option and click [Next] button.
Step5: Select the target location for the installation software.
Step6: Successful installation,there would be a shortcut on the desktop.
Step7: Open the software, set the complete user information and continue to operate.
Step8: Double-click the KeyGen-scanmaster-2.1 icon to get the registration keys.
Step9: Enter the installation code and click[Generate Key] button.
Then enter the registration keys to complete the registration.
WIFI Connection:
You need to configure your PC or cellphone before you can use this software.
For example, on a PC you should follow the steps shown in the pictures below:
ScanMaster-ELM Software Usage:
Double-click the ScanMaster-ELM icon to start it.
Click the button, choose WLAN in the drop list which resides in the tab named
Communication.
Enter IP address 192.168.0.10 and port number 35000. Click [OK].
Now the software is ready to use.
Choose the language you need.
Click the [Connect] button in the lower left corner to connect the device.
The software is running
Read Trouble Codes
Read Live Data Grip
FoCCCus Software Usage:
Open the FoCCCus folder and you will see the FoCCCus icon.
Software port settings and device manager detected ports, both must be consistent.
Select the language and click the [Open] button.
These are what you’ll see when the software is running:
Package includes:
1PC x KOLSOL ELM327 WIFI OBD2 Scanner V1.5
1PC x CD-ROM
/
