www.dedicatedmicros.com
INSTALLATION MANUAL
MANUEL D’INSTALLATION
INSTALLATIONSHANDBUCH
MANUAL DE INSTALACIÓN
MANUALE D'INSTALLAZIONE
Pendant Mount Bracket
CE Mark
This product is marked with the CE symbol and indicates compliance
with all applicable directives.
Directive 89/336/EEC.
A “Declaration of Conformity” is held at Dedicated Micros Ltd., 11
Oak Street, Swinton, Manchester, M27 4FL.
Dennard Pendant Mount Bracket Installation Manual Page. 1
1. Instructions
1. Using the base casting as a template, drill and fit wall plugs to the mounting surface. Fit & screw
the base casting to the mounting surface.
2. The cable loom needs to be routed through the various mounting bracket components, as
shown above, prior to final assembly
(Routing the cable after assembly is almost impossible to achieve)
3. Assemble the bracket components as shown:
a) Screw the COVER to the BASE CASTING using the 4 x trilobular thread forming screws
supplied.
b) Fit the ARM A keyhole slots over the M6 screw heads fitted to the cover, then rotate to lock
and tighten the screws.
c) Slide the PLASTIC COVER down the arm, align the two brass pegs in the base casting with
the corresponding holes in the plastic cover and push in to lock.
d) Attach the second ARM B to the first arm (either in the pendent or wall mount configuration)
and fit the two M6 screw & nut sets supplied.
e) Before fitting the Surveillance Dome, attach the safety bond to the tag on the end of the
ARM B. Fit the 7 way connector to the dome. Fit the dome to the bracket arm by aligning the
keyhole slots with the M6 screw heads fitted to the dome, rotate to lock then tighten the screws.
f) Slide the PLASTIC COVER down the arm and locate it as in c) above
Base casting
Cover
Arm A
(without safety bond tag)
Plastic cover
Plastic cover
Arm B
(with safety bond tag)
Safety bond
Surveillance
dome
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Issue 3
74 0310
www.dedicatedmicros.com
UK Technical Help
Dennard Limited
Unit 4, Park Iron Works, Kingsley, Nr Bordon,
Hampshire GU35 9LY
Tel: +44 (0)1420 485713 Fax: +44 (0)1420 485714
e-mail: sales@dennard-cctv.com
European Technical Help
Dedicated Micros Europa
Neckarstraße 15, 41836 Hückelhoven, Deutschland
Tel.: +49 (0) 24 33 52 58 26 Fax: +49 (0) 24 33 52 58 20.
E-Mail: [email protected]
Dedicated Micros France
9-13 rue du Moulinet, 75013 Paris, France
Tél. : +33 1 45 81 99 99, Fax : +33 1 45 81 99 89.
e-mail: [email protected]
Dedicated Micros Belgique
Joseph Chantraineplantsoen 1, 3070 Kortenberg, Belgique
Tél. : +32 2751 3480, Fax : +32 2751 3481
e-mail: [email protected]
Dedicated Micros Ltd. Slovenija
Delavska cesta 26, 4208 Sencur-Slovenija
Tel: +386 (4) 279 18 90, Fax: +386 (4) 279 18 91
e-mail: [email protected]
/