Abus FUBE50020 Datasheet

Type
Datasheet
ABUS Security-Center
FUBE50020
Proximity Chip Key
Product highlights:
• For arming/disarming the Secvest 2WAY and Terxon
• Without code entry – never “forget your PIN code” again
• Simply hold in front of the alarm panel or control panel
• Functions on a completely contact-free basis
• Several chip keys can be trained
The proximity key is an optional accessory for contact-free arming
and disarming of alarm panels, replacing code entry. It allows
unique authentication of the user in the alarm system.
Easy operation:
To arm or disarm the system, you just hold the chip in front of the
alarm panel or control panel. The user no longer needs to remember
a PIN code, and this makes authorization (authentication) on the
system much easier. It is used for easy, convenient arming and
disarming of the ABUS alarm systems Secvest 2WAY and Terxon.
Installation and programming:
The chip key is trained into the alarm panel; the authorization is then
programmed directly at the alarm panel. The radio field of the
receiver provides the voltage to the proximity key for the code
transmission; the key does not need its own
battery.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
FUBE50020
Proximity Chip Key
Technical Data
Dimensions (HxD) 7,5x34 mm
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
  • Page 1 1
  • Page 2 2

Abus FUBE50020 Datasheet

Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI