Edision AZ5502 Proximity Chip Sticker Set / 5pcs User manual
- Type
- User manual
ABUS Security-Center
Proximity Chip Sticker, 5pcs. Set Smartvest/Terxon SX
Art.-Nr. AZ5502
• Proximity arming and disarming of the Smartvest / Terxon alarm system without entering a code on the control
panel
• Self-adhesive, unobtrusive proximity chip sticker for mobile phone, wallet etc.
• Simply hold it in front of the control panel
• Simple installation and configuration on the Terxon alarm control panel / Smartvest Wireless-Keypad
Simple, practical and convenient
As an optional accessory for the Terxon alarm system, the proximity chip sticker allows proximity arming and
disarming of the alarm system via the control panel. Simply hold the chip sticker in front of the control panel.
The sticker should be stuck to a suitable item that the user carries around every day.
Simple identification without a code
No PIN code is required for identification. Users simply hold the item carrying the chip sticker in front of the
control panel to verify their authorisation.
Programming and important information
The chip sticker is programmed directly at the alarm control panel, where the user authorisations are also
configured. The sticker is powered by the RF field of the receiver – which means no batteries are required. To
prevent impairment of the function of the chip sticker, it should not be stuck to metallically shielded items or
exposed to moisture or temperatures above 50°C. The sticker must not be bent or exposed to magnetic fields.
© 2016 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
-
1
-
2
