Videx Security SL5488 Owner's manual

Brand: Videx Security

Model: SL5488

Type: Owner's manual

Videx Security SL5488 is a telephone designed for use with door entry systems. It allows you to communicate with visitors at your door, open the door remotely, and adjust various settings such as the number of rings, privacy time, and intercommunication.

Here are some of the key capabilities of the SL5488:

Answer incoming calls from visitors at your door
Open the door remotely using the door release button
Adjust the number of rings to your liking
Set a privacy time to prevent calls from being received
Intercommunicate with other monitors in the same apartment or building
Adjust the speech, ring, and brightness volume levels

Here are some of the key capabilities of the SL5488:

Answer incoming calls from visitors at your door
Open the door remotely using the door release button
Adjust the number of rings to your liking
Set a privacy time to prevent calls from being received
Intercommunicate with other monitors in the same apartment or building
Adjust the speech, ring, and brightness volume levels

USER INSTRUCTION

To activate the privacy facility (i.e.

No calls will be received).

Press and hold the button and

the button (for approx. 3

seconds). The privacy on LED3 will

illuminate.

To deactivate the privacy facility

before the time out period.

Press and hold the button and

the button (for approx. 3

seconds). The privacy on LED3 will

turn off.

Bus relay button. To activate a bus

relay pick up the handset and press

as many times as the address value of

the relay. (Please note this relay will

not be fitted on all systems)

Art.

Telephone

Ring

Volume

Door release

button

Pressing this during a call

will open the door. Also used

for intercommunicating

between other monitors

when in standby.

USING THE PRIVACY FACILITY

Talk Button LED 2:

Pressing this button after a

call is made will open the

speech path, pressing it

again will end the

conversation. Pressing the

talk button in standby will

recall the picture (press the

talk button the number of

times of the door to recall).

During a call press and hold

to speak in simplex mode,

release button to allow

speech from panel.

Privacy Switch:

Press and hold this button along

with the talk button to switch

privacy on and off.

Privacy LED

Red LED indicates if

privacy is on or off.

Colour

Control

Brightness

Control

Spare service buttons:

STEP 1

STEP 2

Speech

Volume

LED

Door open LED

Bus relay button

LED 1:

ACTIVAT

ING THE 2305

RELAY

USER INSTRUCTION

Adjusting the number of rings, privacy time and intercommunication:

Number of rings: - To program the number of rings the monitor must be in programming mode. This is achieved by

pressing the two following buttons at the same time – the left button of the volume control and the right button of

the colour intensity control. When the programming mode is entered LED1 starts flashing, this will automatically

reset after 20 seconds of idle time. When in the programming mode press and hold the button, LED1 will stop

flashing and LED2 will start to flash showing the number of rings (each flash = 1 ring, i.e. 6 flashes = 6 rings) once the

required value of rings has been reached, release the button. LED1 will start flashing again to signal that other

programming operations can be performed. After a short period with no further buttons being pressed, programming

mode will end.

Privacy Operation: - Press and hold the button and the button (for approx. 3 seconds) to enable the

privacy function. LED3 next to the button illuminates and the unit emits a beep. To set the privacy duration press

and hold the button, LED 1 will stop flashing and LED 3 will start to flash showing the number of times the

button is pressed (each flash = 15 minutes i.e. 8 flashes = 2 hours). Once the duration has been reached release

the button. Wait approx 10 seconds for LED1 to stop flashing to signal that the new value is stored.

Intercommunication: - Firstly please note that extension 1 is mandatory. One extension in each apartment must

be set as extension 1. To intercommunicate with another device in the same apartment simply press the

button the number of times of the extension to call i.e. to call extension 3 press the button 3 times and wait. To

intercommunicate with another apartment (dip-switch 1 on SW3 only) simply press the button the number

of times of the phone ID to call and wait for an answer.

To open the door press the

button. To end the call press the

button.

An incoming call will be signalled by

an audible tone from the videophone

and the picture will appear (the

picture will only appear on extension

phone 1).

UISL5488 1.0

Press the button once and speak

with the caller, alternatively hold the

button for 3 seconds to activate

simplex speech. Then pressing and

holding the button will allow speech

to the door and releasing it will allow

speech from the door.

STEP 1

STEP 2

EP 3

ANSWERING A CALL

Art.

8 Telephone

Videx Security SL5488 Owner's manual

Brand: Videx Security

Model: SL5488

Type: Owner's manual

Here are some of the key capabilities of the SL5488:

Answer incoming calls from visitors at your door
Open the door remotely using the door release button
Adjust the number of rings to your liking
Set a privacy time to prevent calls from being received
Intercommunicate with other monitors in the same apartment or building
Adjust the speech, ring, and brightness volume levels

Download PDF

report

Videx Security SL5488 Owner's manual

Videx Security SL5488 Owner's manual

Related papers

Other documents