2. Kohler
  3. K-5864-5U-FF

Kohler K-5864-5U-FF, 5864-5U-0, K-5864-5U-FD Specification

  • Hello! I am an AI chatbot trained to assist you with the Kohler K-5864-5U-FF Specification. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Features
•
KOHLER cast iron
•
Acid-resistant enamel finish
•
Undercounter
•
Single compartment
•
5-hole (oversized)
•
Undermount sink kit 23
″
(58.4) included
•
33
″
(83.8 cm) x 22
″
(55.9 cm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
IAPMO/UPC
•
ASME A112.19.1M
UNDERCOUNTER KITCHEN SINK
K-5864-5U
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories:
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
•
NA: None applicable
Specified Model
Model Description Colors/Finishes
K-5864-5U 5-hole sink with undermount sink kit 23″ (58.4 cm) ❑ 0 White ❑ Other_____
Recommended Accessories
K-9000 P-Trap ❑ CP
Optional Accessories
K-6637 Hardwood cutting board ❑ NA
K-8801 Duostrainer
®
sink strainer ❑ CP ❑ Other_____
K-5807 Undermount sink kit 36″ (91.4 cm) ❑ CP ❑ Other_____
Product Specification:
The undercounter sink shall be 33″ (83.8 cm) in length and 22″ (55.9 cm) in width. Sink shall be made cast iron with acid
resistant enamel finish. Sink shall be single compartment. Sink shall be 5-hole (oversized). Sink shall include undermount sink
kit 23″ (58.4 cm). Sink shall be Kohler Model K-5864-5U-_______.
CAPE DORYTM
Page1of2
1036832-4-
C
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
kohler.com
Technical Information
Fixture*: Basin area Water depth
Sink 29″ (73.7 cm)
x15″(38.1 cm)
9″ (22.9 cm)
Drain
hole
3-5/8″ (9.2 cm) D.
Faucet
holes
2-3/8″ (6 cm) D.
* Approximate measurements for comparison only.
Included components:
Cut-out template 1034873-7
Undermount sink kit
23″ (58.4 cm)
1054375
Installation Notes
Install this product according to the installation guide.
Faucet holes in undercounter fixture are oversized at
2-3/8″ (6 cm) D. Drill faucet holes in counter according to
fitting rough-in.
12"
(30.5 cm)
22"
(55.9 cm)
14"
(35.6 cm)
8-5/8"
(21.9 cm)
4-1/2"
(11.4 cm)
16-1/2"
(41.9 cm)
4" (10.2 cm)
33" (83.8 cm)
2-1/8" (5.4 cm)
7/16" (1.1 cm)
1-1/2" OD
Product Diagram
CAPE DORYTM
CAPE DORYTM UNDERCOUNTER KITCHEN SINK
Page2of2
1036832-4-
C
/