Features

•

KOHLER cast iron

•

Acid-resistant enamel finish

•

Double (equal) compartment

•

Self-rimming installation available with single, three,

Specified model meets or exceeds the following:

•

ASME A112.19.1/CSA B45.2

KITCHEN SINK

K-5873

Colors/Finishes

•

0: White

•

Other: Refer to Price Book for additional colors/finishes

Other: Refer to Price Book for additional colors/finishes

Specified Model

Model Description Colors/Finishes

K-5873-1 Self-rimming kitchen sink, single-hole ❑ 0 ❑ Other_____

K-5873-3 Self-rimming kitchen sink, 3-holes ❑ 0 ❑ Other_____

K-5873-4 Self-rimming kitchen sink, 4-holes ❑ 0 ❑ Other_____

K-5873-5U Undercounter kitchen sink, 5-holes (shown) ❑ 0 ❑ Other_____

Recommended Accessories

K-9000 P-Trap ❑ CP

Optional Accessories

The cast iron kitchen sink shall be 33″ (838 mm) in length, and 22″ (559 mm) in width. Sink shall have an acid-resistant enamel

finish. Sink shall feature double (equal) compartment. Sink shall be available with single, three, or four holes for self-rimming

installations or five holes for undercounter installations. Sink shall be Kohler Model K-5873-_______-_______.

Drain holes Ø 3-7/8″ (98 mm)

Faucet holes

Self-rimming models Ø 1-3/8″ (35 mm)

Undercounter model Ø 2-3/8″ (60 mm)

* Approximate measurements for comparison only.

Included components:

Cut-out template 1171757-7

Undermount sink kit 23″ (584 mm) 1054375

Install this product according to the installation guide.

NOTICE: Countertop manufacturer or cutter must use the

DEERFIELD

®