Product Information
Applicable product:
4-hole sink K-5823-4
3-hole sink K-5823-3
Fixture*:
Basin area 14″ (35.6 cm) x 18″ (45.7 cm)
Water depth 7″ (17.8 cm)
Drain holes 3-7/8″ (9.8 cm) D.
Faucet holes 1-3/8″ (3.5 cm) D.
* Approximate measurements for comparison only.
Optional accessories:
Hardwood countertop cutting board K-5917
Bottom basin rack (left basin) K-6016L
Bottom basin rack (right basin) K-6016R
Hardwood cutting board K-6559
Wire rinse basket (left basin) K-6603L
Wire rinse basket (right basin) K-6603R
Installation Notes
Install this product according to the installation guide.
Cutout is 31-7/8″ (81 cm) by 20-3/4″ (52.7 cm) with 1-1/2″
(3.8 cm) radius corners.
Fixture dimensions are nominal and conform to tolerances in
ASME Standard A112.19.1M.
1-5/16"
(3.3 cm) R.
4"
(10.2 cm)
4"
(10.2 cm)
4"
(10.2 cm)
1-13/16"
(4.6 cm)
1-13/16"
(4.6 cm)
1-13/16"
(4.6 cm)
K-5823-4
K-5823-3
7-3/8"
(18.7 cm)
10" (25.4 cm)
1-1/2"
(3.8 cm)
1-1/2"
(3.8 cm)
33" (83.8 cm)
1/2"
(1.3 cm)
8-1/8"
(20.6 cm)
13-1/2"
(34.3 cm)
1-1/2" OD
22"
(55.9 cm)
Roughing-In
K-5823
HARTLAND
TM
SELF-RIMMING KITCHEN SINK
HARTLANDTM SELF-RIMMING KITCHEN SINK
115918-1-
CD