Features
•
KOHLER cast iron
•
Acid-resistant enamel finish
•
Under-mount installation available with five holes
•
Single bowl
•
Under-mount sink kit 23″ (584 mm) included
•
Includes left bottom bowl rack, colander with integral
cutting board, and utility rack with soaking cup
•
33″ (838 mm) x 22″ (559 mm) x 9-5/8″ (244 mm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
ASME A112.19.1/CSA B45.2
UNDER-MOUNT KITCHEN SINK
K-5871
Colors/Finishes
•
0: White
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
0: White
•
CP: Polished Chrome
•
ST: Stainless Steel
•
NA: None applicable
•
Other: Refer to Price Book for additional colors/finishes
Specified Model
Model Description Colors/Finishes
K-5871-5UA3 Under-mount kitchen sink ❑ 0 ❑ Other_____
Included Accessories
K-6237 Bottom bowl rack, left side ❑ ST
K-6239 Colander with integral cutting board ❑ 0
K-6194 Utility rack with soaking cup ❑ ST
Recommended Accessories
K-9000 P-Trap ❑ CP
Product Specification
The kitchen sink shall be made of cast iron with acid-resistant enamel finish. Sink shall be 33″ (838 mm) in length, 22″ (559 mm)
in width, and 9-5/8″ (244 mm) in depth. Sink shall be for under-mount installation available with five holes. Sink shall be single
bowl. Sink shall include left bottom bowl rack, colander with integral cutting board, utility rack with soaking cup, and 23″ (584
mm) under-mount sink kit. Sink shall be Kohler Model K-5871-5UA3-_____.
RIVERBYTM
Page 1 of 2
1173298-4-
C
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Optional Accessories
K-5807 Under-mount sink kit 36″ (914 mm) ❑ NA
K-6246 Wood cutting board ❑ NA
K-6255 Bottom bowl rack, right side ❑ ST
K-8801 Duostrainer
®
sink strainer ❑ CP ❑ Other_____
Technical Information
Fixture*:
Bowl area 30-1/4″ (768 mm) x 17-1/4″ (438 mm)
Water depth 9″ (229 mm)
Drain hole Ø 3-7/8″ (98 mm)
Faucet holes Ø 2-3/8″ (60 mm)
* Approximate measurements for comparison only.
Included components:
Cut-out template 1166727-7
Under-mount sink kit 23″ (584 mm) 1054375
Installation Notes
Install this product according to the installation guide.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
16-1/2"
(419 mm)
4"
(102 mm)
10"
(254 mm)
22"
(559 mm)
25-13/16"
(656 mm)
33" (838 mm)
1-1/2" OD
9-5/8"
(244 mm)
15"
(381 mm)
9/16"
(14 mm)
4-1/2"
(114 mm)
2-1/16"
(52 mm)
4-1/2" (114 mm)
Product Diagram
RIVERBYTM
RIVERBYTM UNDER-MOUNT KITCHEN SINK
Page2of2
1173298-4-
C
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Kohler 5871-5UA3-NY Installation guide
-
-
-
-
-
-
-
-
-
