SunTouch Floor Warming 8006GRY161-ST Specification

Brand
SunTouch Floor Warming
Model
8006GRY161-ST
Type
Specification
For fast, easy installation of WarmWire®
electric oor heating
HeatMatrix
™
Uncoupling membrane
SunTouch.com
HeatMatrix Intro
Waterproofing and vapor management
HeatMatrix is a great choice in concrete applications and where moisture or water vapor is a concern. Polypropylene
construction provides a barrier against surface water while deep grooved channels allow evaporation of moisture
from below the membrane.
One ply non-
woven fleece
Polymer modified
thin set mortar
WarmWire
heating cable
Concrete or
plywood substrate
Tile, stone or
laminate flooring
HeatMatrix
™
WarmWire® HeatMatrix uncoupling membrane from SunTouch® protects your tile investment
while offering a fast, easy method of installing WarmWire electric heating cables. Rest assured,
stepping onto a finished tile floor installed with WarmWire and HeatMatrix will guarantee warmth
and durability for many years to come.
HeatMatrix
™
Uncoupling membrane
Durable, lightweight uncoupling with sheer stress control
Employing cutting-edge technology, WarmWire HeatMatrix provides a unique control layer between the tile and
substrate. One-ply, non-woven fleece on the membrane’s underside minimizes the stress caused by lateral, multi-
directional movement within the substrate, eliminating a common cause of cracked tiles. HeatMatrix also offers superior
point load distribution and remains highly resistant to compression during tile installation.
Adjustable
WarmWire
Spacing
HeatMatrix provides simple
adjustment of WarmWire
spacing to match varying
heating requirements.
This flexibility makes it
easy to adjust the layout
so that the wire fits any
space perfectly.
For most
systems, WarmWire is
installed at approximately
3-inch spacing.
The ultimate in heated tile underlayment flexibility!
3- and 4-shape spacing = 10.6 W/ft
2
Recommended in lower heat loss areas such as hallways,
second floor interior spaces, or low traffic areas.
3-shape spacing = 12.3 W/ft
2
Recommended for kitchens, bathrooms, & living areas.
Standard Spacing
3- and 2-shape spacing = 14.8 W/ft
2
Recommended for high heat loss areas like sunrooms,
basements, or near windows.
Where can HeatMatrix
™
be installed?
•
On structurally sound subfloors or concrete under tile, stone,
or laminate. Include both heated and unheated areas to
provide full coverage for crack-isolation and waterproofing.
•
For areas exposed to surface water, use HeatMatrix Joint
Strip to seal the gap between rows of membrane.
What is the height of the membrane?
• 0.24” (6 mm)
How is WarmWire
®
installed?
•
To install WarmWire within the HeatMatrix uncoupling
membrane, simply press the wire into the channels provided.
•
After securing, WarmWire must be embedded in a polymer
modified thinset mortar before the floor covering is installed.
How much HeatMatrix do I need?
• Calculate the total wall-to-wall area of the room. Subtract
the square footage of spaces that will not be covered with
tile or stone to get the total HeatMatrix area required.
• HeatMatrix rolls are available in 2 sizes:
Order# Model#
HeatMatrix 161 ft
2
81019454 8006GRY161-ST
HeatMatrix 40 ft
2
81019455 8006GRY40-ST
HeatMatrix joint strip 81019457 8006HJS - ST
F-ST-HeatMatrix 1615 MF10652 © 2016 SunTouch
USA: Tel: (888) 432-8932 • Fax: (417) 831-4067 • SunTouch.com
Canada:
Tel: (888) 208-8927
•
Fax: (905) 332-7068
Latin America:
Tel: (52) 81-1001-8600
•
Fax: (52) 81-8000-7091
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

SunTouch Floor Warming 8006GRY161-ST Specification

Brand
SunTouch Floor Warming
Model
8006GRY161-ST
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents