koban KMP-01+TRC is a digital time module for rear panel mounting designed to provide precise time control and scheduling for various applications. With its large memory capacity, it allows for both daily and weekly programming, offering flexibility and convenience.
Key Features:
- Daily and Weekly Programming: Plan and automate events with precise control over time and duration.
- Back Panel Mounting: Easy integration into control panels or enclosures.
- AUTO/ON/OFF Manual Switch: Provides manual override options for added flexibility.
- Predefined Formation by Blocks: Simplify programming by grouping days of the week into blocks.
koban KMP-01+TRC is a digital time module for rear panel mounting designed to provide precise time control and scheduling for various applications. With its large memory capacity, it allows for both daily and weekly programming, offering flexibility and convenience.
Key Features:
- Daily and Weekly Programming: Plan and automate events with precise control over time and duration.
- Back Panel Mounting: Easy integration into control panels or enclosures.
- AUTO/ON/OFF Manual Switch: Provides manual override options for added flexibility.
- Predefined Formation by Blocks: Simplify programming by grouping days of the week into blocks.
BACK PANEL ASSEMBLY TIME MODULE KMP-01+TRC ACCESORIO
KMP-01+TRC
0767646
Back panel assembly
time module
www.grupotemper.com
BACK PANEL ASSEMBLY TIME MODULE KMP-01+TRC ACCESORIO
2
1. BRIEF DESCRIPTION OF THE EQUIPMENT
Digital time module for rear panel mounting. It has a large memory capacity for storing
both daily and weekly programming, as well as various useful functions.
✓ Daily and weekly programming
✓ Back panel mounting time module
✓ AUTO/ON/OFF manual switch
✓ Predefined formation by blocks of the days of the week
2. TECHNICAL SPECIFICATIONS OF THE EQUIPMENT
The technical specifications of the equipment are included in the following table.
Power supply
220-240 Vac, 50-60 Hz
Capacity
17 programs ON/OFF
Maximum programmable time
7 days
Minimum programmable time
1 minute
Contact capacity
Resistive (cosφ=1): 16 A
Inductive (cosφ=0,6): 4 A
Power reserve
6 months
Operating temperature
-10oC a +50oC
Dimensions – back panel accessory included (mm)
72(H)x72(W)x30(D)
Weight
65 g
Protection degree
IP20
3. EQUIPMENT DIAGRAM AND BUTTON DESCRIPTION
H= 72 mm
W= 72 mm
D= 30 mm
Dimensions with back
panel accessory
included
BACK PANEL ASSEMBLY TIME MODULE KMP-01+TRC ACCESORIO
3
BUTTON DESCRIPTION OF THE PRODUCT
CONNECTION SCHEME
TIME MODULE LCD SCREEN
4. STEPS FOR CARRYINT OUT THE CONFIGURATION
The different steps that must be followed to carry out the programming of the
equipment are shown below.
• STEP 1. To start programming, first press the RESET button (C).
• STEP 2. To set the date and time, keep the button ( ) pressed and at the same
time press D+ (for the day), H+ (for the hours) and M+ (for the minutes).
1. (P) Program configuration
2. (D+) Day configuration (date)
3. (H+) Hour configuration (time)
4. (M+) Minute configuration (time)
5. ( ) Time configuration of the equipment
6. (C) Reset button
7. (MANUAL) Selecting the operation of the equipment,
AUTO, ON or OFF
8. (C/R) Cancel all the programs
Days of the week
ON MODE ( ), AUTO MODE (AUTO),
OFF MODE ( )
Current time (hour and minute)
Configured program
ON/OFF
BACK PANEL ASSEMBLY TIME MODULE KMP-01+TRC ACCESORIO
4
• STEP 3. To program configure, press the P button, selecting program 1 ON
(program 1 ON appears by default the first time the equipment is configured).
• STEP 4. To select the on time, you must press the H+/M+ buttons to set the
hours and minutes.
• STEP 5. Pressing the D+ button selects the days to be programmed.
• STEP 6. To carry out the shutdown program, press the P button again, by default
program 1 OFF appears.
• STEP 7. To select the time to turn off, you must press the H+/M+ buttons to set
the hours and minutes.
• STEP 8. If you want to program the shutdown for the same days as the ignition
program, you do not need to press the D+ button, the days are already selected
by default.
• STEP 9. The button ends the programming.
NOTE: To carry out the successive programs repeat steps 3 – 9.
BACK PANEL ASSEMBLY TIME MODULE KMP-01+TRC ACCESORIO
5
GARANTÍA/GUARANTEE/GARANTIE
3 años/anos/années/years
ES – T.E.I. garantiza este producto por 3 años ante defecto de fabricación. Para hacer
válida esta garantía, es imprescindible disponer de la factura de compra.
PT – T.E.I. garantía este produto contra defeitos de fábrica ate 3 anos. Para validar esta
garantia, é essencial ter a facture da compra.
FR – T.E.I. garantit ce produit pour la durée de 3 années contre tout default de
fabrication. Pour valider cette garantie, il est essential d'avoir la facture d'achat.
EN – T.E.I. Guarantees this product for 3 years against manufacturing defect. To make
this guarantee valid, it is essential to have the purchase invoice.
-
1
-
2
-
3
-
4
-
5
koban KMP-01+TRC is a digital time module for rear panel mounting designed to provide precise time control and scheduling for various applications. With its large memory capacity, it allows for both daily and weekly programming, offering flexibility and convenience.
Key Features:
- Daily and Weekly Programming: Plan and automate events with precise control over time and duration.
- Back Panel Mounting: Easy integration into control panels or enclosures.
- AUTO/ON/OFF Manual Switch: Provides manual override options for added flexibility.
- Predefined Formation by Blocks: Simplify programming by grouping days of the week into blocks.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
koban KDP DALI 03-S Owner's manual
-
-
-
-
-
-
-
-
-
Other documents
-
Cardylet CL-CARGADOR-T-22/32-S Owner's manual
-
Crady RCT-80 Owner's manual
-
Dell Intel PRO Family of Adapters Owner's manual
-
Mellanox Technologies 0NHYP5 User manual
-
-
Mellanox Technologies MCX4412-ACAN User manual
-
-
-
Xerox Elixir Forms Development Software User guide
-
