2. Noble House
  3. 2771

Noble House 2771, 2794, 296525, 42292 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Noble House 2771 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1 OF 4
Caution : You must read this before you proceed.
ROUND PHENIX TABLE
CAUTION : This table is NOT a TOY.
Keep your child / children at bay during the assembly process.
Assembly Preparation
Before Beginning Assembly:
Assembly Instructions
2 OF 4
NO. Picture QTY
A 1
B 4
C 1
8
8
8
8
8
8
J 1
Washer(8mm)
Table Top
Table Leg with pre-attached Levellers
Support Ring
Spring Washer(8mm)
Hex Bolt(25mm)
Assembly Step
I
Parts list
Description
Loosely affix the Support Ring(C) to Table Leg with pre-attached Levellers (B)
using Washers,Spring Washers,and Hex Bolts(H), with the Spanner(J).
DO NOT OVERTIGHTEN.
Unpack and place all parts on a clean, soft surface.
Hard ware
H
Washer(8mm)
Spring Washer(8mm)
Hex Bolt(30mm)
Spanner
H
J
3 OF 4
Repeat Step 2 to attach the remaining 3 Legs(B) to the Support Ring(C)
DO NOT OVERTIGHTEN.
Lay the Table Top(A), facedown, onto a flat, soft, clean surface.
Attach the Table Legs(B) to the the Table Top(A) using Washers, Spring
Washers, and Nuts(I) with the Spanner(J).
Tighten all these Nuts and Washers in a sequential manner.
DO NOT OVERTIGHTEN.
Stand the table rightside up.
Now tighten up all screws.
Adjust the pre-attached Levellers in the legs to attain evenness.
Your table is now ready for use.
H
I
4 OF 4
/