Toro TX 1000 Compact Tool Carrier Installation guide

TX 1000 Compact Tool Carrier
Toro
Brand
Toro
Model
TX 1000 Compact Tool Carrier
Type
Installation guide

This manual is also suitable for

Toro TX 1000 Compact Tool Carrier is designed to provide versatility and efficiency for various tasks. With its compact size, it can easily maneuver in tight spaces, making it ideal for residential and commercial applications. It features a powerful engine, durable construction, and easy-to-use controls, allowing operators to handle demanding jobs. Its compatibility with a wide range of attachments, including mowers, snow blowers, and tillers, makes it a versatile tool for landscaping, snow removal, and gardening projects.

Toro TX 1000 Compact Tool Carrier is designed to provide versatility and efficiency for various tasks. With its compact size, it can easily maneuver in tight spaces, making it ideal for residential and commercial applications. It features a powerful engine, durable construction, and easy-to-use controls, allowing operators to handle demanding jobs. Its compatibility with a wide range of attachments, including mowers, snow blowers, and tillers, makes it a versatile tool for landscaping, snow removal, and gardening projects.

FormNo.3413-341RevA
TrackGuideKit
TX1000CompactToolCarrier
ModelNo.136-4760
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Safety
SafetyandInstructional
Decals
Safetydecalsandinstructionsareeasilyvisibletotheoperatorandarelocatednearanyareaofpotential
danger.Replaceanydecalthatisdamagedormissing.
decal136-5750
136-5750
1.ReadtheOperator's
Manual.
2.Tensionnutguide
Installation
1
PreparingtheMachine
NoPartsRequired
Procedure
1.Parkthemachineonalevelsurface.
2.Engagetheparkingbrake.
3.Removeanyattachmentsfromthemachine.
4.Lowertheloaderarmssothattheyareapproximately
20to25cm(8to10inches)abovetheframe.
5.Shutofftheengineandremovethekey.
6.Raisethemachineoffthegrounduntilyoucanaccess
theinsideofthetrackbeneaththemachine.Support
themachineusingjackstands.
Note:Usejackstandsratedforyourmachine.Refer
totheOperator’sManualforyourmachinetodetermine
theweight.
©2017—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3413-341*A
WARNING
Mechanicalorhydraulicjacksmayfailto
supportthemachineandcauseseriousinjury.
Usejackstandswhensupportingthemachine.
2
InstallingtheGuideBlocks
Partsneededforthisprocedure:
8
Guideblock
16Bolt
1
Outsidetemplate
1Insidetemplate
2Thread-lockingcompound
Procedure
Note:Youdonotneedtoremovethetrackstoinstallthe
guideblocks.
1.Placetheoutsidetemplateoverthesecondandthird
road-wheelboltheadsontheoutsideofatrackas
showninFigure1.
Note:Theoutsidetemplatehassmallerholesthanthe
insidetemplate.Itwillttightlyovertheboltheads.
g197723
Figure1
Lefttrackshown
1.Towardfrontofthe
machine
3.Marktheseholes.
2.Outsidetemplate
2.Markthelocationsofthe4smallerholesusinga
1/4-inchcenterdrillbit(Figure1).
Note:Youmayusea1/4-inchdrillbitifyoudonot
haveacenteringdrill.
3.Removethetemplateanddrillthenalholesusinga
9/32-inchdrillbit.
4.Install2guideblocksusing4bolts(Figure2).
Note:OrienttheblocksasshowninFigure3.
g197817
Figure2
1.Guideblock(2)2.Bolt(4)
g199035
Figure3
1.Trackframe3.Guideblock
2.Bolt
5.Applythread-lockingcompoundtotheboltsand
tightenthem.
6.Ontheinsideofthetracks,placetheinsidetemplate
overthesecondandthirdroad-wheelbolts(Figure4).
Thetemplatewillttightlyoverthenutheads.
2
g197899
Figure4
Lefttrackshown
1.Towardfrontofthe
machine
3.Marktheseholes.
2.Insidetemplate
7.Repeatsteps2through5fortheinsideofthetracks.
8.Repeattheentireprocedurefortheothertrack.
9.Lowerthemachinetotheground.
3
InstallingtheTensioningDecal
Partsneededforthisprocedure:
2Decal
Procedure
Installthetensioningdecalonthetensiontubeasshownin
Figure5onbothsidesofthemachine.
g203951
Figure5
1.Decal
4
ReplacingtheTracks
(Optional)
Partsneededforthisprocedure:
2
Track(soldseparately)
Procedure
1.Lift/supportthesideofthemachinetobeworkedon
sothatthetrackis3to4inches(7.6to10cm)off
theground.
2.Removethelockingboltandnut(Figure6).
g029758
Figure6
1.Tensiontube3.Tensioningscrew
2.Lockingbolt
3.Usinga1/2-inchdriveratchet,releasethedrivetension
byturningthetensioningscrewclockwise(Figure6
andFigure7).
3
g029759
Figure7
1.Drivesprocket5.Roadwheel
2.Track6.Pivottensioner
3.Frontwheel
7.Ratchet(1/2inch)
4.Rearbolt
4.Loosentherearbolt,nearthedrivewheel(Figure7).
Note:Thisenablesthedrivewheeltopivotforward
andreleasethetensionofthetrack.Ifitdoesnot
pivot,turnontheengineandbrieymovethetraction
controlforward.
5.Removethetrackatthetopofthefrontwheel,peeling
itoffthewheelwhilerotatingthetrackforward.
6.Whenthetrackisoffthefrontwheel,removeitfrom
thedrivesprocketandroadwheels(Figure7).
7.Beginningatthedrivesprocket,coilthenewtrack
aroundthesprocket,ensuringthatthelugsonthetrack
tbetweenthespacersonthesprocket(Figure7).
8.Pushthetrackunderandbetweentheroadwheels
(Figure7).
9.Startingatthebottomofthefrontwheel,installthe
trackaroundthewheelbyrotatingthetrackrearward
whilepushingthelugsintothewheel.
10.Usinga1/2inchdriveratchet,turnthetensioning
screwcounter-clockwiseuntilthetensioningscrew
bottomsout(Figure8).
g203963
Figure8
1.Tensionnut2.Tensionscrew
11.Aligntheclosestnotchinthetensionscrewtothe
lockingboltholeandsecurethescrewwiththelocking
boltandnut(Figure6).
12.Torquetherearboltto108to122N∙m(80to90ft-lb).
13.Lowerthemachinetotheground.
14.Repeattheproceduretoreplacetheothertrack.
15.Drivethemachine,thenparkthemachineonalevel
surface,engagetheparkingbrake,shutofftheengine,
andremovethekey.
Note:Thetracktensionwillloosenaftersomeuse.
16.Removethelockingboltandnut(Figure6).
17.Usinga1/2inchdriveratchet,turnthetensioning
screwcounter-clockwiseuntilthetensionnutaligns
withthegreensectionofthedecal(Figure9).
g203962
Figure9
1.Greensectionofdecal
2.Tensionnut
18.Aligntheclosestnotchinthetensionscrewtothe
locking-boltholeandsecurethescrewwiththelocking
boltandnut(Figure6).
19.Repeatsteps16through18fortheothertrack.
4
5
AdjustingtheTrackTension
MachineswithoutNewTracksOnly
NoPartsRequired
Procedure
1.Removethelockingboltandnut(Figure6).
2.Usinga1/2inchdriveratchet,turnthetensioning
screwcounter-clockwiseuntilthetensionnutaligns
withthethegreensectionofthedecal(Figure9).
3.Aligntheclosestnotchinthetensionscrewtothe
locking-boltholeandsecurethescrewwiththelocking
boltandnut(Figure6).
4.Repeattheprocedurefortheothertrack.
5.Drivethemachine,thenparkthemachineonalevel
surface,engagetheparkingbrake,shutofftheengine,
andremovethekey.
6.Verifythatthetensionnutis1.3cm(1/2inch)away
fromtherearofthetensiontubeslotforbothtracks
(Figure9).Adjustifnecessary.
5
Notes:
Notes:
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Toro TX 1000 Compact Tool Carrier Installation guide

TX 1000 Compact Tool Carrier
Toro
Brand
Toro
Model
TX 1000 Compact Tool Carrier
Type
Installation guide
This manual is also suitable for

Toro TX 1000 Compact Tool Carrier is designed to provide versatility and efficiency for various tasks. With its compact size, it can easily maneuver in tight spaces, making it ideal for residential and commercial applications. It features a powerful engine, durable construction, and easy-to-use controls, allowing operators to handle demanding jobs. Its compatibility with a wide range of attachments, including mowers, snow blowers, and tillers, makes it a versatile tool for landscaping, snow removal, and gardening projects.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers