2. Toro
  3. Track Alignment Tool, Dingo TX Compact Utility Loaders

Toro Track Alignment Tool, Dingo TX Compact Utility Loaders User manual

  • Hello! I am an AI chatbot trained to assist you with the Toro Track Alignment Tool, Dingo TX Compact Utility Loaders User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Form No. 3353-700 Rev A
Track Alignment Tool
For TX Compact Utility Loaders
Model No. 110-0069
Operator's Manual
W henev er y ou c hang e or remo v e a trac k, dri v e
sproc k et, or trac k guide , align the dri v e sproc k et,
trac k guide , and tension wheel using the trac k
alignment tool. Aligning the trac k assembly
will reduce w ear on the trac k and impro v e
perfor mance .
Aligning a Track
1. R emo v e the trac k; refer to the traction unit
Operator’ s Manual for instr uctions .
2. Loosen the 4 trac k guide bolts ( Figure 1 ).
Important: Do not r emo v e the bolts.
Figure 1
1. Drive sprocket spacer 3. Track alignment tool
2. Track guide bolts (only
2 shown; the other 2 are
behind the track tensioning
assembly)
3. Place the slot of the alignment tool around a
dri v e sproc k et spacer on the bottom of the
sproc k et ( Figure 1 ) and secure it with the pin
( Figure 2 ).
Figure 2
1. Pin
4. R otate the alignment tool up into the c hannel
in the trac k guide and betw een the tension
wheels ( Figure 2 and Figure 3 ), mo ving the
trac k guide as needed to allo w it to fit into the
c hannel.
Figure 3
1. Track alignment tool 2. Tension wheels
© 2005—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com. Original Instructions (EN)
Printed in the USA
All Rights Reserved
5. Tie with a cord or hold the trac k alignment
tool in place and tighten the trac k guide bolts ,
tor quing them to 67 to 83 ft-lb (91 to 112
N ⋅ m).
6. R emo v e the pin securing the alignment tool
and remo v e the tool.
7. Install the trac k; refer to the traction unit
Operator’ s Manual for instr uctions .
2
/