OneSpace JNFF User manual

Brand: OneSpace

Model: JNFF

Type: User manual

This manual is also suitable for

50-JN1301

OneSpace JNFF is an ultra-modern glass computer desk with drawers, designed to provide a stylish and functional workspace. It features a spacious tempered glass desktop that can support up to 66 pounds, making it ideal for holding computer monitors, laptops, and other office essentials. The desk also includes two drawers with a weight capacity of 22 pounds each, providing ample storage space for files, supplies, and personal items. The drawers are equipped with smooth-rolling casters for easy opening and closing. Additionally, the desk's sturdy metal frame ensures stability and durability.

ULTRAMODERN GLASS COMPUTER DESK WITH DRAWERS

ASSEMBLY INSTRUCTIONS

MODEL 50-JN1301

SUPPLIER CODE: JNFF

For fastest service on claims, requests for replacement parts,

www.comfortproducts.net/support

e-mail: customerservice@comfortproducts.net

Keep your sales receipt as documentation of your ownership.

CUSTOMER SERVICE

or questions, please visit our website at:

OneSpace is a Trademark of Comfort Products, Inc.

™

mumixam pote l ba T

weight capacity

66lbs

mumixam

rewar D

weight capacity

sbl 2 2

ASSEMBLY OVERVIEW (50-JN1301)

# DESCRIPTION SIDE 1 SIDE 2 STOCK # QTY.

2 of 13

ITEMS ARE NOT SHOWN TO SCALE.

PARTS LIST 1 OF 2 (50-JN1301)

# DESCRIPTION SIDE 1 SIDE 2 STOCK # QTY.

DESCRIPTION

STOCK #

QTY.

1 Leg 51-JN1301LG 2

Foot

51-JN1301FT 4

3 Support Board 51-JN1301SB 1

Left Board 51-JN1301LB 1

Right Board 51-JN1301RB 1

Middle Board 51-JN1301MB

7 Bottom Board 51-JN1301BM 1

8 Back Board 51-JN1301BB 1

10 Crossbar

51-JN1301CR

3 of 13

Outer Rollers

51-JN1301DS

2 sets

of 4

9b Inner Rollers

Left Right

ITEMS ARE NOT SHOWN TO SCALE.

PARTS LIST 2 OF 2 (50-JN1301)

# DESCRIPTION SIDE 1 SIDE 2 STOCK # QTY.

DESCRIPTION

STOCK #

QTY.

11 Desktop 51-JN1301DT 1

Glass Side Panel

51-JN1301SP 2

13 Drawer Back 51-JN1301DB 2

Drawer Left

Panel

51-JN1301DL 2

Drawer Right

Panel

51-JN1301DR 2

Drawer Front 51-JN1301DF

17 Drawer Bottom 51-JN1301DBM 2

4 of 13

5 of 13

EXTRA HARDWARE INCLUDED FOR YOUR CONVENIENCE. ITEMS ARE NOT SHOWN TO SCALE.

HARDWARE LIST (50-JN1301)

PART DESCRIPTION

A M6 X 70MM

M6 X 45MM 2

M4 X 18MM 4

M4 X 35MM 8

C 21

IF YOU ARE MISSING ANY OF THESE PARTS,

OR IF YOU HAVE A DAMAGED PART, PLEASE

VISIT WWW.COMFORTPRODUCTS.NET/SUPPORT

REFERENCE THE MODEL # ON THE FRONT OF

THIS MANUAL. SIMPLY COMPLETE THE INFORMATION,

INCLUDING THE PART YOU NEED. THE PART WILL

NORMALLY BE SHIPPED WITHIN 48 HOURS.

- READ THE INSTRUCTION MANUAL BEFORE ASSEMBLING.

- REMOVE ALL PIECES BEFORE BEGINNING INSTALLATION.

- OPEN THE HARDWARE AS NEEDED .

- ASSEMBLE IN AN AREA WITH PLENTY OF SPACE.

- READ EACH STEP BEFORE BEGINNING CONSTRUCTION.

- HAVE A SCREWDRIVER BEFORE YOU BEGIN ASSEMBLING

(NOT INCLUDED).

- NEVER FORCE THE SCREWS OR FITTINGS.

- KEEP THIS MANUAL FOR FUTURE REFERENCE.

- TIGHTEN ALL THE SCREWS EVERY 6 MONTHS.

CLEANING AND CARE

- CLEAN SURFACES WITH A DRY OR DAMP CLOTH.

- DO NOT USE ABRASIVE CLEANERS.

- DO NOT USE A POWER DRILL.

HARDWARE KIT

STOCK # 51-JN1301HA

Cam

Drawer Handle

Allen Wrench

B Dowel

E M4 x 14MM

F M6 x 30MM

H M6 x 25MM

I M4 x 14MM

J Cap & Washers

Extra Hardware (A - L) 1 set

ASSEMBLY INSTRUCTIONS (50-JN1301)

6 of 13

STEP 1

Attach the feet (2) to the bottom of the legs (1).

STEP 2

Attach the legs to the support board (3) with four screws (A), tightening with the Allen wrench (N).

A x 4

ASSEMBLY INSTRUCTIONS (50-JN1301)

7 of 13

STEP 3

Screw six Minix Bolts (C) into the corner holes of the Bottom Board (7) and insert the six Dowels (B) into the

middle holes.

STEP 4

Place six Cams (D) into the lower holes of the Left Board (4), Right Board (5), and Middle Board (6). Note the

arrow on the face of each Cam. It should be pointing toward the nearest edge of the board where the

Minix Bolt (C) will go in.

Before attaching the Left, Right, and Middle Boards to the Bottom Board (7), make sure the unused Cam holes

are all positioned on the same side. Then, align the boards with the six Minix Bolts (C) and six Dowels (B) and

push them down until tight. Tighten the six Cams (D) clockwise half a turn to lock the boards into place.

B x 6

D x 6

C x 6

The unused holes should be

on the same side.

CAUTION:

Do not overtighten

cams.

ASSEMBLY INSTRUCTIONS (50-JN1301)

8 of 13

STEP 5

Screw seven Minix Bolts (C) into the Back Board (8).

Place seven Cams (D) in the remaining holes of the boards

assembled in Step 4. Attach the Back Board (8) by aligning the Minix Bolts (B) with the holes. Tighten the

Cams clockwise half a turn to lock the boards into place.

STEP 6

Attach two Right Outer Rollers (9a) to the Right Board (5) and Middle Board (6) using four screws (E). Refer to the

drawing below for which holes in the rollers to use.

C x 7

E x 4

D x 7

CAUTION:

Do not overtighten

cams.

9a RIGHT

ASSEMBLY INSTRUCTIONS (50-JN1301)

9 of 13

STEP 7

Attach two Left Outer Rollers (9a) to the Left Board (4) and Middle Board (6) using four screws (E). Refer to the

used for the right roller.

Attach two Crossbars (10) to the Left, Middle, and Right Boards using four Screws (F) at the ends and

two Screws (G) in the middle.

STEP 8

E x 4

F x 4

G x 2

9a LEFT

ASSEMBLY INSTRUCTIONS (50-JN1301)

10 of 13

STEP 9

Attach the legs to the Bottom Board (7)

using four Screws (F).

Attach the glass Desktop (11) to the Crossbars

using four Screws (H).

STEP 10

F x 4

H x 4

ASSEMBLY INSTRUCTIONS (50-JN1301)

11 of 13

STEP 11

Attach the Glass Side Panels (12) to the desk using four Screws (I) with the Caps and Washers (J).

Attach the Drawer Back (13) to the Drawer Left

Panel (14) and Right Panel (15) with four Screws (K),

making sure the grooves are aligned. Slide the

Drawer Bottom (17) into the grooves. Repeat this

step for the second drawer.

Attach four Bolts (C) to the Drawer Front (16). Attach

the Drawer Handle (M) to the Drawer Front with two

Screws (L). Repeat for the second drawer.

STEP 12 STEP 13

I x 4

J x 4

K x 8

C x 8

L x 4

M x 2

ASSEMBLY INSTRUCTIONS (50-JN1301)

STEP 14

Insert four Cams (D) into the holes of the Drawer Left Panel (14) and Right Panel (15). Attach the Drawer Front (16)

to the Left and Right Panels, making sure the groove is aligned with the Drawer Bottom (17). Tighten the Cams

clockwise half a turn. Repeat this step for the second drawer.

STEP 15

Flip the assembled drawer upside down and attach a Right Inner Roller (9b) and a Left Inner Roller (9b) using

four Screws (E) as shown. Refer to the drawing below for which holes in the roller to use. Repeat this step for

the second drawer. Insert the drawers into the desk by aligning the inner and outer rollers.

CAUTION:

Do not overtighten

cams.

D x 8

9b RIGHT

9b LEFT

E x 8

12 of 13

•

13 OF 13

DO NOT stand on the desk. Do not use the desk as a stepladder.

ed.

Every 6 months, check all bolts and screws to ensure they are tight.

This product is California 93120 Compliant for Formaldehyde.

Comfort Products, Inc.

P.O. Box 999

Memphis, TN 38101

Comfort Products warrants this product to be free from defects in material and workmanship for one (1) year. This warranty is made by

Comfort Products only to the original end-user customer acquiring the product directly from Comfort Products’ authorized dealers

as shown by the original sales receipt. The end-user customer remedy pursuant to this warranty is limited to repair or replacement of

parts at Comfort Products’ option within a reasonable amount of time. Comfort Products reserves the right to require damaged parts

to be returned to Comfort Products upon request. Consent from Comfort Products must be obtained before any warranty work is

performed. This warranty applies under conditions of normal use and is not subject to defects caused by improper assembly or

disassembly; defects occurring after purchase due to product mo

sure

to the elements; labor or assembly cost. This warranty does not cover the cost of transportation or labor. In no event shall Comfort

Products be liable in either tort or contract for any loss or direct, special, incidental, consequential or exemplary damages. This Limited

Warranty is NOT applicable to end-user customers who use Comfort Products for rental purposes. This warranty applies only to end-user

customers in the United States. All warranties are limited to the original purchaser for normal use. The weight capacity of the desktop is

66 pounds and the weight capacity of the drawers is 22 pounds. For claims or questions concerning this warranty, please visit:

www.comfortproducts.net or email us at: [email protected]

PLEASE VISIT WWW.COMFORTPRODUCTS.NET FOR WARRANTY INFORMATION

www.comfortproducts.net

[email protected]

OneSpace is a Trademark of Comfort Products, Inc.

™

MODEL: 50-JN1301

OneSpace JNFF User manual

Brand: OneSpace

Model: JNFF

Type: User manual

This manual is also suitable for

50-JN1301

Download PDF

report

OneSpace JNFF User manual

This manual is also suitable for

OneSpace JNFF User manual

Related papers

Other documents