Pneumatic
Adjustable Height
Standing Desk
TOOLS PROVIDED
INSTRUCTIONS
Hex wrench
1
A
B
B
C
D
1
2
3
2
4
5
3
4 5
6 7
QTY: 12 QTY: 4 QTY: 2 QTY: 2 QTY: 8 QTY: 16 for each QTY: 8 for each
1/4”x16mm 1/4”x55mm M4x12mm M4x35mm M5x12mm for 1/4” for M5 each
QTY: 1 Q
TY: 2 QTY: 2 QTY: 1
Forward side
Back side
Forward
side
Down Up
Spring washer must be
between the washer
and the screw.
A
34
6
1
6 1 8
6
8
1
6
1
6
2
8
8
7 5
D
C
WARNING
1. Legs contain high pressure. Do not open! Do not heat!
2. Small items may present choking hazards - keep out of reach of
children under 3 years.
3. Only use this desk for its intended purposes.
4. Sit and stand at this desk, not on it.
5. Follow weight capacity guidelines: stationary 150 lbs, active 30 lbs.
6. Ensure all hardware is secured before use; check and tighten
hardware every 6 months for best results.
7. Do not change or modify the infrastructure of this desk in any way.
8. If parts are missing or broken, do not use this desk until they are
replaced with authorized parts.
MyBinding.com
5500 NE Moore Court
Hillsboro, OR 97124
Toll Free: 1-800-944-4573
Local: 503-640-5920
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
ExerWork 7170 Owner's manual
-
Exerpeutic ExerWorK Series Owner's manual
-
Office Star Products PRD3230-BLK Operating instructions
-
UPLIFT Desk UPL021 Operating instructions
-
ExerWork 7900 Owner's manual
-
OneSpace 50-JN1301 User manual
-
-
Chief KWD230B User manual
-
Chief KGL110 User manual
-
