2. Bolens
  3. 11A-B0BL765
11A-B0BL765

Bolens 11A-B0BL765 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Bolens 11A-B0BL765 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How to assemble the upper and lower handles of the Bolens 11A-B0BL765?
    How to attach the starter rope handle to the engine?
    How to fill the fuel tank of the Bolens 11A-B0BL765?
    How to add oil to the Bolens 11A-B0BL765?
    How to start the engine of the Bolens 11A-B0BL765?
778-12364B© 2015 11A-B0B
Starter
Rope Handle
Blade Control Handle
Wing Nuts
T-Bolts
A. Remove the wing nuts and carriage bolts
securing the upper handle to the lower
handle.
A
Pivot the upper handle
upward.
B. Remove T-bolts from
the handle brackets.
A. Pull upward on
the handle until
the holes in lower
handle line up
with the holes
in the handle
bracket.
A
B
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
A
B
C
D
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
A
B
B
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
Oil Fill /
Dipstick
Primer
Gas Fill
778-12364B© 2015 11A-B0B
Push the primer three times.
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
While standing behind the machine, pivot the Blade
Control Handle against the upper handle.
Grasp the starter rope handle and pull with quick, full-
arm stroke. If the engine does not start after five pulls,
repeat steps 9 and 10.
3
Spark Plug Boot
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
6
9
8
7
10
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
/