2. Troy-Bilt
  3. 12AVB2A3711
12AVB2A3711

Troy-Bilt 12AVB2A3711, 12AGA2A6311, 12AVB2A3311, 12AVB2A3721 Fast Start Guide

  • Hello! I am an AI chatbot trained to assist you with the Troy-Bilt 12AVB2A3711 Fast Start Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • How do I attach the upper handle to the lower handle?
    How do I attach the T-bolts to the handle bracket?
    How do I use the starter rope?
    How do I add oil to the machine?
    How do I add gasoline to the machine?
    How do I start the machine?
A. Hold blade control handle against upper handle.
B. Slowly pull starter rope handle from engine and
slip starter rope into the rope guide.
C. Tighten rope guide wing knob.
D. Use cable tie to secure cables to lower handle.
A. Remove the wing nuts and carriage bolts
securing the upper handle to the lower
handle.
778-13321© 2015 12AVB2A3
Pull upward on the
handle until the holes
in lower handle line up
with the holes
in the handle bracket.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Note: Refer to your Operator’s Manual
for instructions on attaching the grass collector.
Starter
Rope Handle
Blade Control Handle
Wing Nuts
T-Bolt
A
Pivot the upper handle
upward.
B. Remove T-bolts from
the handle brackets.
A
B
B
A. Insert the T-bolts removed in Step 1B
through the handle brackets to secure
the handle in place.
B. Secure upper handle
to lower handle with
wing nuts (on outside)
and carriage bolts
removed Step 1A.
A
B
C
B
A
D
1
4
2
5
3
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
778-12358A© 2015 12AVB2A
Gas Cap
While standing behind the machine, pivot the Blade Control
Handle against the upper handle.
Grasp the starter rope handle and pull with a quick, full-arm
stroke.
778-13321© 2015 12AVB2A3
Oil Fill
Gas Cap
Spark Plug
Boot
While standing behind the machine, pivot the Blade Control
Handle against the upper handle.
Grasp the starter rope handle and pull with a quick, full-arm
stroke.
Make sure the spark plug boot is connected to
the spark plug before attempting to start.
Fill fuel tank with clean, fresh gasoline. Do not
fill above the base of fuel tank neck.
Pour the entire contents of the oil bottle (supplied)
into the oil fill. Check the oil level using the
dipstick. (Refer to the Operator’s Manual)
6
8
7
9
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY
AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U
/