Dynojet Power Commander III Installation guide

Power Commander III
Dynojet
Brand
Dynojet
Model
Power Commander III
Category
Car kits
Type
Installation guide
2007 Harley-Davidson V-Rod - PCIII USB - 1i815-511 www.powercommander.com
2007 Harley-Davidson V-Rod
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
Installation Instructions
Parts List
1 Power Commander
1 USB Cable
1 CD-ROM
1 Installation Guide
1 Power Adapter
2 Power Commander Decals
2 Dynojet Decals
3 Zip ties
2 Velcro
1 Alcohol swab
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
The ignition MUST be turned
OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
3 Unplug the stock wiring harness
from the ECM (Fig. B).
4 Connect the PCIII wiring har-
ness in-line of the stock harness
and ECM (Fig. C)
2007 Harley-Davidson V-Rod - PCIII USB - 2i815-511 www.powercommander.com
1 Open the main seat compart-
ment.
2 Remove the rear seat by remov-
ing the two nuts (Fig. A).
Fig. AFig. B
Fig. C
Remove these nuts
Unplug
PC connectors
Stock
connector
5 Install the PCIII on top of the
fuel tank (Fig. D).
The supplied velcro can be used
to secure the PCIII in place if
desired.
6 Reinstall the rear seat making
sure the PCIII wiring harness
does not get damaged.
Fig. D
2007 Harley-Davidson V-Rod - PCIII USB - 3i815-511 www.powercommander.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Dynojet Power Commander III Installation guide

Power Commander III
Dynojet
Brand
Dynojet
Model
Power Commander III
Category
Car kits
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents