2. Computers & electronics
  3. Telecom & navigation
  4. Mobile phones
  5. Car kits
  6. Dynojet
  7. Power Commander III
Power Commander III

Dynojet Power Commander III Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Dynojet Power Commander III Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2007 Harley-Davidson V-Rod - PCIII USB - 1i815-511 www.powercommander.com
2007 Harley-Davidson V-Rod
Dynojet Research 2191 Mendenhall Drive North Las Vegas, NV 89081 (800) 992-4993 www.powercommander.com
Installation Instructions
Parts List
1 Power Commander
1 USB Cable
1 CD-ROM
1 Installation Guide
1 Power Adapter
2 Power Commander Decals
2 Dynojet Decals
3 Zip ties
2 Velcro
1 Alcohol swab
You can also download the Power
Commander software and latest maps
from our web site at:
www.powercommander.com
The ignition MUST be turned
OFF before installation!
PLEASE READ ALL DIRECTIONS BEFORE STARTING INSTALLATION
Button Adjustment Display
Faceplate Buttons
Expansion Port
USB Port
3 Unplug the stock wiring harness
from the ECM (Fig. B).
4 Connect the PCIII wiring har-
ness in-line of the stock harness
and ECM (Fig. C)
2007 Harley-Davidson V-Rod - PCIII USB - 2i815-511 www.powercommander.com
1 Open the main seat compart-
ment.
2 Remove the rear seat by remov-
ing the two nuts (Fig. A).
Fig. AFig. B
Fig. C
Remove these nuts
Unplug
PC connectors
Stock
connector
5 Install the PCIII on top of the
fuel tank (Fig. D).
The supplied velcro can be used
to secure the PCIII in place if
desired.
6 Reinstall the rear seat making
sure the PCIII wiring harness
does not get damaged.
Fig. D
2007 Harley-Davidson V-Rod - PCIII USB - 3i815-511 www.powercommander.com
/