Dell 1130 Mono Owner's manual

Copyright

Safety information

About this user’s guide

Features of your new product

Introduction

Getting started

Network setup (Dell 1130n only)

Basic setup

Media and tray

Printing

Management tools

Maintenance

Troubleshooting

Supplies

Specifications

Appendix

Glossary

www.dell.com | www.support.dell.com

Dell 1130

Dell 1130n

adjusting

tray size

booklet printing

booklets

change percentage of your document

cleaning

inside

outside

cleaning a machine

control panel

convention

duplex printing (manual)

printer driver

Embedded Web Service

general information

favorites settings, for printing

features

machine features

power saving feature

print media feature

printer driver

supplied software

font setting

front view

glossary

jam

clearing paper

tips for avoiding paper jams

Linux

common Linux problems

driver installation for network connected

driver installation for USB cable connected

printer properties

printing

supplied softwares

system requirements

unifled driver configurator

loading

paper in manual tray

paper in the tray1

special media

adjusting

tray size

booklet printing

booklets

change percentage of your document

cleaning

inside

outside

cleaning a machine

control panel

convention

duplex printing (manual)

printer driver

Embedded Web Service

general information

favorites settings, for printing

features

machine features

power saving feature

print media feature

printer driver

supplied software

font setting

front view

glossary

jam

clearing paper

tips for avoiding paper jams

Linux

common Linux problems

driver installation for network connected

driver installation for USB cable connected

printer properties

printing

supplied softwares

system requirements

unifled driver configurator

loading

Copyright

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and Dell Toner Management System are trademarks of Dell Inc.;

Microsoft, Windows, Windows Vista, and Windows Server are registered trademarks of Microsoft Corporation in the United

States and/or other countries. Adobe and Acrobat Reader are either registered trademarks or trademarks of Adobe Systems

Incorporated in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and names of

their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

REV. 1.00

Safety information

These warnings and precautions are included in order to prevent injury to you and others, as well as preventing any

potential damage to your machine. Be sure to read and understand all of these instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow all warnings and

instructions marked on the machine and in the accompanying literature. After reading this section, keep it in a safe place for

future reference.

Important safety symbols

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are in order, according

to the degree of danger.

Explanation of all icons and signs used in the user’s guide:

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsafe practices that may result in minor personal injury or property damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

Operating environment

Warning

Do not use if the power cord is damaged or if the electrical

outlet is not grounded.

This could result in electric shock or fire.

Do not bend, or place heavy

objects on the power cord.

Stepping on or allowing the

power cord to be crushed by a

heavy object could result in electric shock or

fire.

Do not place anything on top of the machine (water, small

metal or heavy objects, candles, lit cigarettes, etc.).

This could result in electric shock or fire.

Do not remove the plug by

pulling on the cord; do not

handle the plug with wet hands.

This could result in electric

shock or fire.

If the machine gets overheated, it releases smoke, makes

strange noises, or generates an odd odor, immediately turn

off the power switch and unplug the machine.

This could result in electric shock or fire.

Caution

During an electrical storm or for a period of

non-operation, remove the power plug from

the electrical outlet.

If the plug does not easily enter the electrical outlet, do

not attempt to force it in.

This could result in electric shock or fire.

Call an electrician to change the electrical outlet, or this

could result in electric shock.

Be careful, the paper output area is hot.

Burns could occur.

Do not allow pets to chew on the AC power, telephone or

PC interface cords.

This could result in electric shock or fire and/or injury to your

pet.

If the machine has been dropped, or if the cabinet

appears damaged, unplug the machine from all

interface connections and request assistance from

qualified service personnel.

Otherwise, this could result in electric shock or fire.

If the machine does not operate properly after these

instructions have been followed, unplug the machine from all

interface connections and request assistance from qualified

service personnel.

Otherwise, this could result in electric shock or fire.

If the machine exhibits a sudden and distinct change

in performance, unplug the machine from all interface

connections and request assistance from qualified

service personnel.

Otherwise, this could result in electric shock or fire.

Operating method

Caution

Do not forcefully pull the paper out

during printing.

It can cause damage to the

machine.

When printing large quantities, the bottom part of the

paper output area may get hot. Do not allow children to

touch.

Children may be burned.

Be careful not to put your hand

between the machine and paper

tray.

You may get injured.

When removing jammed paper, do not use tweezers or

sharp metal objects.

It can cause damage to the machine.

Do not block or push objects into the

ventilation opening.

This could result in elevated component

temperatures which can cause damage or fire.

Do not allow too many papers to stack up in the paper output tray.

It could cause damage to the machine.

Use care to avoid paper cuts when replacing

paper or removing jammed paper.

You may get hurt.

This machine's power interception device is the power cord.

To switch off the power supply, remove the power cord from the

electrical outlet.

Installation / Moving

Warning

Do not place the machine in an area with dust, humidity or water leaks.

This could result in electric shock or fire.

Caution

When moving the machine, turn

the power off and disconnect all

cords; then lift the machine with

at least two people.

The machine could fall, causing human injury

or machine damage.

Do not put a cover over the machine or place it in an airtight

location, such as a closet.

If the machine is not well-ventilated, this could result in fire.

Do not place the machine on an unstable

surface.

Make sure you plug the power cord into a grounded electrical outlet.

Otherwise, this could result in electric shock or fire.

The machine could fall, causing human injury

or machine damage.

The machine should be connected to the

power level which is specified on the label.

If you are unsure and want to check the

power level you are using, contact the

electrical utility company.

Do not overload wall outlets and extension cords.

This can diminish performance, and could result in electric shock or

fire.

Use only No.26 AWG

[a]

or larger, telephone

line cord, if necessary.

Otherwise, it can cause damage to the

machine.

Use the power cord supplied with your machine for safe operation. If

you are using a cord which is longer than 2 meters (79”) with a 140V

machine, then the gauge should be 16 AWG or larger.

Otherwise, it can cause damage to the machine, and could result in

electric shock or fire.

[a]

AWG: American Wire Gauge

Maintenance / Checking

Caution

Unplug this product from the wall outlet before cleaning the inside

of the machine. Do not clean the machine with benzene, paint

thinner or alcohol; do not spray water directly into the machine.

This could result in electric shock or fire.

Keep cleaning supplies

away from children.

Children may get hurt.

When you are working inside the machine replacing supplies or

cleaning the inside, do not operate the machine.

You may get injured.

Do not disassemble,

repair or rebuild the

machine by yourself.

It can cause damage to

the machine. Call a certified

technician when the machine needs

repair.

Keep the power cable and the contact surface of the plug clean from dust or

water.

This could result in electric shock or fire.

To clean and operate the machine,

strictly follow the user's guide

provided with the machine.

Otherwise, it can cause damage to

the machine.

Do not remove any covers or guards that are fastened with screws.

The machine should only be repaired by Dell service technician.

Supply usage

Caution

Do not disassemble the toner cartridge.

Toner dust can be dangerous to humans.

When storing supplies such as toner

cartridges, keep them away from

children.

Toner dust can be dangerous to

humans.

Do not burn any of the supplies such as toner cartridge

or fuser unit.

It can cause an explosion or fire.

Using recycled supplies, such as toner, can

cause damage to the machine.

In case of damage due to the use of recycled

supplies, a service fee will be charged.

When changing the toner cartridge or removing jammed paper,

be careful not to let toner dust touch your body or clothes.

Toner dust can be dangerous to humans.

About this user’s guide

This user’s guide provides information about basic understanding of the machine as well as detailed explanation on each

step during actual usage.

Read the safety information before using the machine.

If you have a problem using the machine, refer to the troubleshooting chapter. (See Troubleshooting.)

Terms used in this user’s guide are explained in the glossary chapter. (See Glossary.)

All illustrations in this user’s guide may differ from your machine depending on its options or models.

The procedures in this user’s guide are mainly based on Windows XP.

Convention

Some terms in this guide are used interchangeably, as below:

Document is synonymous with original.

Paper is synonymous with media, or print media.

Machine refers to printer or MFP.

The following table offers the conventions of this guide:

Convention Description Example

Bold For texts on the display or button names on the machine. Cancel

Note Provides additional information or detailed specification of the

machine function and feature.

The date format may differ from

country to country.

Caution Gives users information to protect the machine from possible

mechanical damage or malfunction.

Do not touch the green underside of

the toner cartridge.

Footnote Provides additional more detailed information on certain words or

a phrase.

a. pages per minute

(“Cross-

reference”)

Guides users to a reference page for the additional detailed

information.

(See

Finding more information.)

Finding more information

You can find information for setting up and using your machine from the following resources, either as a print-out or on

screen.

Material

name

Description

Quick

Install

Guide

This guide provides information on setting up your machine and this requires that you follow the instructions

in the guide to prepare the machine.

User’s

Guide

This guide provides you with step-by-step instructions for using your machine’s full features, and contains

information for maintaining your machine, troubleshooting and replacing supplies.

Printer This help provides you with help information on printer driver and instructions for setting up the options for

Driver

Help

printing. (See Using help.)

Dell

website

If you have Internet access, you can get help, support, printer drivers, manuals, and order information from

the Dell websites www.dell.com or support.dell.com.

Features of your new product

Your new machine is equipped with a number of special features that improve the quality of the documents you print.

Special Features

Print with excellent quality and speed

You can print with a resolution of up to 1,200 x 600 dpi (Dell 1130) and up to 1,200 x 1,200 dpi (Dell

1130n) effective output.

Dell 1130 prints up to 18 ppm, A4-sized paper or up to 19 ppm, letter sized paper. Dell 1130n prints

up to 24 ppm, A4-sized paper and letter-sized paper.

Handle many different types of printable material

Manual tray supports plain paper in various sizes, letterhead, envelopes, labels, custom-sized media,

postcards, and heavy paper.

The 250-sheet tray supports plain paper.

Create professional documents

Print Watermarks. You can customize your documents with words, such as “Confidential”. (See Using

watermarks.)

Print Posters. The text and pictures of each page of your document are magnified and printed across

the sheet of paper and can then be taped together to form a poster. (See

Printing posters.)

You can use preprinted forms and letterhead with plain paper. (See Using overlay.)

Save time and money

To save paper, you can print multiple pages on one single sheet of paper. (See Printing multiple pages

on one sheet of paper.)

This machine automatically conserves electricity by substantially reducing power consumption when not

in use.

To save paper, you can print on both sides of the paper (Manual). (See Printing on both sides of paper

(Manual).)

Print in various environments

You can print with Windows as well as Linux and Macintosh systems.

Your machine is equipped with a USB interface.

The Dell 1130n comes with a built-in Network interface, 10/100 BaseTX.

IPv6

This machine supports IPv6 (Dell 1130n only).

Features by Models

The machine is designed to support all of your document needs from printing to more advanced networking solutions for

your business.

Features by models include:

FEATURES Dell 1130 Dell 1130n

Hi-Speed USB 2.0

●

[a]

●

Network Interface Ethernet 10/100 BaseTX wired LAN ●

Duplex (2-sided) printing (Manual) ● ●

[a]

USB 1.1

( ●: Included, Blank: Not available)

Introduction

This chapter gives you an overview of your machine:

This chapter includes:

Machine overview

Control panel overview

Understanding the control panel

Machine overview

Front view

This illustration may differ from your machine depending on its model.

1

Document output tray

6

Manual feeder

2

Control panel

7

Manual feeder guide

3

Front cover handle

8

Output support

4

Front cover

9

Toner cartridge

5

Tray 1

Rear view

This illustration may differ from your machine depending on its model.

1

Rear cover

3

USB port

2

Network Port

[a]

4

Power receptacle

[a]

Dell 1130n only.

Control panel overview

This control panel may differ from your machine depending on its model.

1

Jam Shows the status of jam occurrence of your machine. (See LEDs.)

2

Online/Error Shows the status of your machine. (See LEDs.)

3

Cancel Stops an operation at any time. Also there are more functions. (See Understanding the control

panel.)

4

Power Turns power on or off. (See Understanding the control panel.)

Understanding the control panel

LEDs

The color of the LEDs indicates the machine's current status.

LED Status Description

Jam ( )

Orange On A paper jam has occurred. (See

Clearing paper jams.)

Online/Error

(

)

Off

The machine is off-line.

Green On

The machine is in power saver mode.

The machine is on-line and can receive data from the computer.

Blinking

When the LED blinks slowly, the machine is receiving data from the computer.

When the LED blinks rapidly , the machine is printing data.

Red On

The cover is open. Close the cover.

There is no paper in the tray. Load paper in the tray.

The machine has stopped due to a major error.

Your system has some problems. If this problem occurs, contact your service

representative.

The toner cartridge has almost reached its estimated cartridge life

[a]

. It is

recommended to replace the toner cartridge. (See

Replacing the toner cartridge.)

Blinking

A minor error has occurred and the machine is waiting for the error to be cleared.

When the problem is cleared, the machine resumes.

Toner is low. Replace the cartridge. The estimated cartridge life

[a]

of toner is close.

Prepare a new cartridge for replacement. You may temporarily increase the printing

quality by redistributing the toner. (See

Redistributing toner.)

[a]

Estimated cartridge life means the expected or estimated toner cartridge life, which indicates the average capacity

of print-outs and is designed pursuant to ISO/IEC 19752. The number of pages may be affected by operating

environment, printing interval, media type, and media size. Some amount of toner may remain in the cartridge even

when red LED turned on and the printer stops printing.

Dell does not recommend using non-genuine Dell toner cartridge such as refilled or re-manufactured. Dell cannot

guarantee non-genuine Dell toner cartridge's quality. Service or repair required as a result of using non-genuine

Dell toner cartridges will not be covered under the machine warranty.

All printing errors will be appear in the Printer Status Monitor program window. If the problem persists, call for

service.

Buttons

(Cancel button)

By pressing the

(cancel button), you can:

Function Description

Printing

demo

page

[a]

In Ready mode, press and hold this button for about 2 seconds until the status LED blinks slowly, and

release. (See

Printing a demo page.)

Printing

configuration

sheet

[b]

In Ready mode, press and hold this button for about 5 seconds until the status LED blinks fast, and

release. (See

Printing a machine report.)

Printing a

cleaning

sheet

[b]

In Ready mode, press and hold this button for about 10 seconds until the status LED blinks slowly, and

release. (See

Cleaning the inside.)

Cancel print

job

Press

(cancel button) during printing. The red LED blinks while the print job is cleared from both the

machine and the computer and then the machine returns to ready mode. This may take some time

depending on the size of the print job.

Manual print Press

(cancel button) each time you load a sheet of paper in the

manual tray when you select Manual Feeder for Source from your software application.

[a]

When you print the demo page for Dell 1130, configuration sheet is printed as well.

[b]

Dell 1130n only

(Power button)

This button must be used to turn the machine on/off.

Turning on the machine

1. Plug in the power cord.

2. Press (power) on the control panel.

If you want to turn the power off, press and hold this button for 1 second.

Getting started

This chapter gives you step-by-step instructions for setting up the USB connected machine and software.

This chapter includes:

Setting up the hardware

Printing a demo page

Supplied software

System requirements

Installing USB connected machine’s driver

Sharing your machine locally

Setting up the hardware

This section shows the steps to set up the hardware, as is explained in the Quick Install Guide. Make sure you read the

Quick Install Guide first and follow the steps below:

Location

1. Select a stable location.

Select a level, stable place with adequate space for air circulation. Allow extra space to open covers and trays.

The area should be well ventilated and away from direct sunlight or sources of heat, cold, and humidity. Do not set

the machine close to the edge of your desk or table.

Printing is suitable for altitudes under 1,000 m (3,281 ft). Refer to the altitude setting to optimize your printing. (See

Altitude adjustment.)

Place the machine on a flat, stable surface so that there is no incline greater than 2 mm (0.08 inch). Otherwise,

printing quality may be affected.

2. Unpack the machine and check all the enclosed items.

3. Remove tape holding the machine.

4. Install the toner cartridge.

5. Load paper. (See Loading paper in the tray.)

6. Make sure that all cables are connected to the machine.

7. Turn the machine on. (See Turning on the machine.)

This equipment will be inoperable when mains power fails.

Printing a demo page

Print a demo page to make sure that the machine is operating correctly.

To print a demo page:

In ready mode, press and hold the

(cancel button) for about 2 seconds.

Supplied software

After you have set up your machine and connected it to your computer, you must install the printer software using the

supplied CD. The software CD provides you with the following software.

OS Contents

Windows

Printer driver: Use this driver to take full advantage of your machine’s features.

Printer Status Monitor: This program allows you to monitor the machine’s status and alerts you when an

error occurs during printing.

Printer Settings Utility (Dell 1130n only): This program allows you to set up printer’s other options

from your computer desktop.

Dell Toner Management System™: Displays the status of the printer and the name of the job when

send a job to print. The Dell Toner Management System™window also displays the level of toner remaining

and allows you to order replacement toner cartridge.

Firmware Update Utility: This program helps you to update printer’s firmware.

SetIP (Dell 1130n only): Use this program to set your machine’s TCP/IP addresses.

Macintosh

Printer Driver: Use this driver to take full advantage of your machine’s features.

Linux

Unified Linux Driver: Use this driver to take full advantage of your machine’s features.

System requirements

Before you begin, ensure that your system meets the following requirements:

Microsoft® Windows®

Your machine supports the following Windows operating systems.

OPERATING

SYSTEM

Requirement (recommended)

CPU RAM

free HDD

space

Windows 2000 Intel® Pentium® II 400 MHz (Pentium III 933 MHz) 64 MB (128 600 MB

MB)

Windows XP Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (256

MB)

1.5 GB

Windows Server®

2003

Intel® Pentium® III 933 MHz (Pentium IV 1 GHz) 128 MB (512

MB)

1.25 GB to 2

GB

Windows Server

2008

Intel® Pentium® IV 1 GHz (Pentium IV 2 GHz) 512 MB (2048

MB)

10 GB

Windows Vista® Intel® Pentium® IV 3 GHz 512 MB (1024

MB)

15 GB

Windows 7 Intel® Pentium® IV 1 GHz 32-bit or 64-bit processor or higher 1 GB (2 GB) 16 GB

Support for DirectX® 9 graphics with 128 MB memory (to enable the Aero theme).

DVD-R/W Drive

Windows Server

2008 R2

Intel® Pentium® IV 1 GHz (x86) or 1.4 GHz (x64) processors (2

GHz or faster)

512 MB (2048

MB)

10 GB

Internet Explorer® 5.0 or higher is the minimum requirement for all Windows operating systems.

Administrator rights are required to install the software.

Windows Terminal Services is compatible with this machine.

Macintosh

OPERATING

SYSTEM

Requirements (recommended)

CPU RAM

free HDD

space

Mac OS X 10.3 ~

10.4

Intel Processors

PowerPC G4/ G5

128 MB for a PowerPC based Mac (512

MB)

512 MB for a Intel-based Mac (1 GB)

1 GB

Mac OS X 10.5

Intel Processors

867 MHz or faster Power PC G4/

G5

512 MB (1 GB) 1 GB

Mac OS X 10.6

Intel Processors

1 GB (2 GB) 1 GB

Linux

Item Requirement (recommended)

Operating system RedHat Enterprise Linux WS 4, 5 (32/64 bit)

Fedora Core 2~10 (32/64 bit)

SuSE Linux 9.1 (32 bit)

OpenSuSE 9.2, 9.3, 10.0, 10.1, 10.2, 10.3, 11.0, 11.1 (32/64 bit)

Mandrake 10.0, 10.1 (32/64 bit)

Mandriva 2005, 2006, 2007, 2008, 2009 (32/64 bit)

Ubuntu 6.06, 6.10, 7.04, 7.10, 8.04, 8.10 (32/64 bit)

SuSE Linux Enterprise Desktop 9, 10 (32/64 bit)

Debian 3.1, 4.0, 5.0 (32/64 bit)

CPU Pentium IV 2.4 GHz (Intel Core™2)

RAM 512 MB (1024 MB)

Free HDD space 1 GB (2 GB)

Installing USB connected machine’s driver

A locally connected machine is a machine directly attached to your computer using the USB cable. If your machine is

attached to a network, skip the following steps below and go on to installing network connected machine’s driver. (See

Installing network connected machine’s driver.)

Only use an USB cable shorter than 3 m (118 in. ).

Windows

You can install the machine software using the typical or custom method.

The following steps below are recommended for most users who use a machine directly connected to your computer. All

components necessary for machine operations will be installed.

1. Make sure that the machine is connected to the computer and powered on.

If the “Found New Hardware Wizard” window appears during the installation procedure, click Cancel in close

the window.

2. Insert the supplied software CD into your CD/DVD drive.

The software CD should automatically run and an installation window should appear.

If the installation window does not appear, click Start and then Run. Type X:\Setup.exe, replacing “X” with

the letter which represents your CD/DVD drive. Click OK.

If you use Windows Vista, Windows 7 and Windows 2008 Server R2 click Start > All programs > Accessories

> Run.

Type X:\Setup.exe replacing “X” with the letter which represents your CD/DVD drive and click OK.

If the AutoPlay window appears in Windows Vista, Windows 7 and Windows 2008 Server R2, click Run

Setup.exe in Install or run program field, and click Continue or Yes in the User Account Control windows.

3. Click Next.

If necessary, select a language from the drop-down list.

4. Select Typical installation for a local printer. Then, click Next.

The Custom allows you to select the machine’s connection and choose individual component to install. Follow

the on-screen instructions.

Page is loading ...

Dell 1130 Mono Owner's manual

Dell 1130 Mono Owner's manual

Related papers

Other documents