Lindab PRO-R Signal Repeater User manual

Type
User manual
Lindab reserves the right to make changes without prior notice 1
2021-10-20
Signal repeater
lindab | protect
PRO-R
Description
PRO-R is a repeater unit. It is required if more than 30
damper units (PRO-S) are installed to the Fire system Pro, to
enhance the RS-485 signal quality.
The PRO-R is provided with its own 230 V stabilized power
sypply.
Both RS485 cables and the 24 V DC power supply are con-
nected to PRO-R via removable 10-Pin terminal blocks.
Dimensions
O
rdering example
PRO-R
Product
175
175
100
Measurements in mm.
PRO-R
2Lindab reserves the right to make changes without prior notice
2021-10-20
Signal repeater PRO-R
lindab | protect
Technical data Wiring
Supply voltage 24 V DC (+ 10 V DC - + 30 V
DC, non-isolated)
Power consumption 2.16 W
Serial interface
RS485
Data+, Data-
Cables Belden 9841 (2P twisted-pair
cable)/Belden 9842 (4P twisted-
pair cable), if different cables are
used, the transmission distance
may change
Baud rate Automatic switching between
300 and 115200 bps
Isolation 2-way 3000 V DC isolation
protection
ESD protection Yes
LED indicators Available for Power/communica-
tion
Operating
temperature
-25...+75°C
Storage
temperature
-30...+75°C
Humidity 10...90 % RH,
non-condensing
Flammability Fire Retardant Materials (UL94-
V0 Level)
Connector Plug-in screw terminal block
Material, casing Plastic
Mounting DIN-Rail
Dimensions
(HxWxD)
122 x 72 x 35 mm
This product conforms with the
EMC requirements of European
harmonised standards. For the
evaluation regarding EMC, cer-
tain standards were applied to
RFI Emission and Immunity.
PRO-R carries the CE and RoHS
marks.
BAG0
G
BAG0
G
Data+
Data-
V+
GND
PRO-S PRO-S
PRO-R
D
Output DC
24V 0,5A
Input AC
100-240V
+
L(+) N(-)
-
230V
Data+
Data-
BAG0
G
BAG0
G
  • Page 1 1
  • Page 2 2

Lindab PRO-R Signal Repeater User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI