Thinklogical Camera Fiber-Link 6000 Quick start guide

Brand: Thinklogical

Model: Camera Fiber-Link 6000

Category: Network media converters

Type: Quick start guide

CAT5 cable

3 meters – Qty 2

RJ45F to DB9M RJ45F to DB9F

RJ45F to DB9M

ADP-000007-R RJ45F to DB9F

ADP-000008-R

CFL-6000

Camera Fiber-Link

The Camera Fiber-Link System-6000 from Thinklogical® uses one or more Camera Side Units and a Frame Grabber Side Unit

interconnected by duplex, multi-mode fiber optic cables to allow Camera Link video support up to 500 meters (1640 feet) from the host

computer with no loss of signal or resolution and without the use of amplifiers or repeaters of any kind.

With industrial enhancements such as threaded screw-lock input connectors for standard 5V-12V input power, or with our 12V-24V input

power designed for rugged industrial environments, and with our compact, light-weight design, the Camera Fiber-Link System is ideal for any

application.

Visit our website at www.thinklogical.com to see our complete line of Camera Fiber-Link and other fiber-optic extender products.

When you receive your Thinklogical® CFL-6000

Camera Fiber-Link system, you should find the

following items:

Camera Fiber-Link (CFL-3000 Camera Side) Transmitter – Qty 2

Camera Fiber-Link (CFL-6000 Frame Grabber Side) Receiver

DC Power Supply – Qty 3 (Standard or Industrial Option*)

MDR-26 Cable, 2 Meters (CBL-000007-002MR) – Qty 2

Camera Fiber-Link Adapter/Cable Kit (KIT-000013-R) – Qty 1

When lit, the green LED

indicates that power is applied.

Fiber-optic

cable ports.

GND

Serial Port (RJ45) with RS-232 interface

Red LED is ON with no signal and

BLINKS when no camera is connected.

Visit us online at www.thinklogical.com for more product information, current updates and the complete line of Thinklogical® products.

 Communications from Camera to Frame Grabber, SerTFG-

Differential pair with serial communications to frame grabber: 97MHz.

 Communications from Frame Grabber to Camera, SerTC-

Differential pair with serial communications to the camera: 97MHz.

 Camera Control 1 (CC1), Camera Control 2 (CC2), Camera Control 3 (CC3), Camera Control 4 (CC4)

are sampled at 97MHz.

 Serial Port Communications s

ampled at ~32MHz from Camera to Frame Grabber (RX, DSR, CTS) and at 97MHz from Frame Grabber to Camera (RTS, TX, DTX).

CFL-6000_Quick_Start_Rev_E

Hi-Speed Dual Base

QUICK START

GUIDE

(CFL-003000-LCTX)

Upper Connector

Lower Connector

CFL-3000 (Transmitter CAMERA 1)

Complete Steps 1-8 to connect your

Camera Fiber-Link CFL-6000 System

STEP 1: Check the contents to ensure that

you’ve received all the items included with

your system.

STEP 2: Connect multi-mode fiber

optic cables (up to 500 meters) between the

Frame Grabber Side Unit and the two

Camera Side Units. For each camera,

connect L1 to L1 and L2 to L2. Be sure not to

kink or pinch the cables and keep all bend

radii to no less than 3 inches.

STEP 3: Connect the standard +5-12VDC

power supplies (PWR-000022-R), or the

industrial option 12V-24V power supplies

(PWR-000033-R), to the Camera Side Units

(Tx) and plug each one into a standard AC

source.

STEP 4: If using external sensors, lighting,

etc., two CAT5 cables and RJ45F to DB9M

and DB9F adapters (KIT-000013-R) are

included to connect your serial device(s)

through the Camera Side and Frame Grabber

Side units.

STEP 5: Using MDR-26 Cables, connect a

camera to each of the Camera Side Units (Tx)

at the CAMERA port and turn the cameras

ON.

STEP 6: Connect the standard +5-12VDC

power supply (PWR-000022-R), or the

industrial option 12V-24V power supply

(PWR-000033-R), to the Frame Grabber Unit

(Rx) and plug it into a standard AC source.

STEP 7: Using two MDR-26 Cables (CBL-

000007-002MR), connect the CPU’s frame

grabber to the Frame Grabber Side Unit (Rx).

STEP 8: Open the frame grabber

application on the Source CPU. Verify that

all system features are functioning properly.

4RJ45F to DB9M

ADP-000007-R

Camera 1

Camera 2

Local Display 1

4RJ45F to DB9M

ADP-000007-R

(CFL-006000-LCRX)

PHONE: 1-800-291-3211

WEBSITE: www.thinklogical.com

EMAIL: support@thinklogical.com

PHONE: 1-800-291-3211

WEBSITE: www.thinklogical.com

EMAIL: support@thinklogical.com

Extend Distribute Innovate

To complement its line of Camera Fiber-Link extenders, Thinklogical® also offers high performance USB 2.0

and Firewire 800 Camera Extenders. Please contact a Thinklogical® sales representative for details.

Multi-Mode Fiber models are available

with SC-, ST- or LC-type connectors.

Supports one dual base Frame Grabber or two individual Frame Grabbers with a pixel clock of 20-85MHz.

Camera Fiber-Link Sample Rate:

Camera Fiber

Link System

CFL-6000 (Receiver)

CFL-3000 (Transmitter CAMERA 2)

CPU

PWR-000022-R

*Industrial Option 12-24V Power Supply

(PWR-000033-R)

L1: Data Tx to Rx & Video

L2: Data Rx to Tx Local Display 2

CAMERA 2

L2 ◄

L1 ►

SERIAL

FRAME

GRABBER

BASE 1

FRAME

GRABBER

BASE 2

L1 ►

L2 ◄

CAMERA 1

Upper Conn ector Lowe r Connector

Extend Dist ribute Innovat e ®

CAMERA

CAMERA FIBER-LINK®

Digital Camera

Extension System CFL- 6000

HI-SPEED DUAL BASE

FRAME GRABBER SIDE

MRTS Technology

L2►

L1◄

CAMERA

CAMERA FIBER-LINK®

Digital Camera

Extension System CFL- 3000

HI-SPEED BASE

CAMERA SIDE

MRTS Technology

CAMERA SERIAL

Ext en d Distribu te In novate ®

L2►

L1◄

CAMERA

CAMERA FIBER-LINK®

Digital Camera

Extension System CFL- 3000

HI-SPEED BASE

CAMERA SIDE

MRTS Technology

CAMERA SERIAL

Ext en d Distribu te In novate ®

Thinklogical Camera Fiber-Link 6000 Quick start guide

Brand: Thinklogical

Model: Camera Fiber-Link 6000

Category: Network media converters

Type: Quick start guide

Download PDF

report

Thinklogical Camera Fiber-Link 6000 Quick start guide

Thinklogical Camera Fiber-Link 6000 Quick start guide

Related papers

Other documents