Thinklogical Camera Fiber-Link 3000 Quick start guide

Thinklogical
Brand
Thinklogical
Model
Camera Fiber-Link 3000
Category
Network media converters
Type
Quick start guide
CAT5 cable
3 meters – Qty 2
RJ45F to DB9M RJ45F to DB9F
1
RJ45F to DB9M
ADP-000007-R RJ45F to DB9F
ADP-000008-R
Camera Fiber
Link System
®
POWER
5VDC
Copyright © 2012. All rights reserved. Printed in the U.S.A. All trademarks and service marks are the property of their respective owners.
Visit us online at www.thinklogical.com for more product information,
current updates and the complete line of Thinklogical® products.
STEP 7: Using the MDR-26
Cable (CBL-000007-002MR),
connect the CPU’s frame
grabber to the Frame
Grabber Side Unit (Rx).
CFL-3000
Camera Fiber-Link
L2
Red LED is ON with no signal and
BLINKS when no camera is connected.
When you receive your Thinklogical® CFL-3000 Camera Fiber-
Link system, you should find the following items:
Camera Fiber-Link (CFL-3000 Camera Side) Transmitter
Camera Fiber-Link (CFL-3000 Frame Grabber Side) Receiver
5VDC Power Supply – Quantity 2
MDR-26 Cable, 2 Meters (CBL-000007-002MR) – Quantity 1
Camera Fiber-Link Adapter/Cable Kit (KIT-000013-R) – Quantity 1
Fiber-optic cable
ports.
GND
Serial Port
(RJ45) with
RS-232
interface
STEP 8: Open your frame grabber
application. Verify that all system
features are functioning properly.
STEP 4: Using an MDR-26 cable connect the camera
to the Camera Side Unit (Tx) and turn the camera ON.
When lit, the green LED
indicates that power is applied.
STEP 5: If using external sensors, lighting,
etc., two CAT5 cables and RJ45 to DB9M and
DB9F adapters (KIT-000013-R) are included
to connect your serial device(s) through the
Camera Side and Frame Grabber Side units.
STEP 3: Connect the 5VDC power supply
(PWR-000022-R) to the Camera Side Unit (Tx)
and plug it into a standard AC source.
STEP 6: Connect the 5VDC power supply (PWR-000022-R) to the
Frame Grabber Side Unit (Rx) and plug it into a standard AC source.
 Communications from Camera to Frame Grabber, SerTFG—
Differential pair with serial communications to the Frame Grabber, sampled at 97MHz.
 Communications from Frame Grabber to Camera, SerTC—
Differential pair with serial communications to the Camera, sampled at 97MHz.
 Camera Control 1 (CC1), Camera Control 2 (CC2), Camera Control 3 (CC3), Camera Control 4 (CC4)
are sampled at 97MHz.
 Serial Port Communications
are sampled at ~32MHz from Camera to Frame Grabber (RX, DSR, CTS) and at 97MHz from Frame Grabber to Camera (RTS, TX, DTX).
Camera Fiber-Link Sample Rate:
L1►
L2◄
CAMERA
CAMERA FIBER-LINK®
Digital Camera
Extension System CFL- 3000
HI-SPEED BASE
FRAME GRABBER SIDE
Powered by
MRTS Technology
FRAME
GRABBER SERIAL
L2►
L1◄
CAMERA
CAMERA FIBER-LINK®
Digital Camera
Extension System CFL- 3000
HI-SPEED BASE
CAMERA SIDE
Powered by
MRTS Technology
CAMERA SERIAL
Hi-Speed Base
CFL-3000_Quick_Start_Rev_D
QUICK START
GUIDE
8
RJ45F to DB9M
ADP-000007-R
23
STEP 1: Verify the contents.
4
5
6
7
Multi-Mode Fiber models are available with
SC-, ST-, or LC-type fiber connectors.
To complement its line of Camera Fiber-Link
extenders, Thinklogical also offers high
performance USB 2.0 and Firewire 800
Camera Extenders. Please contact a
Thinklogical sales representative for details.
STEP 2: Connect multi-mode fiber
optic cables between the Frame
Grabber side unit and the Camera side
unit (up to 500 meters). Be sure not to
kink or pinch the cables and keep all
bend radii to no less than 3 inches.
Connect:
L1 to L1 and L2 to L2
Thinklogical’s Camera Fiber-Link System® uses a Camera Side Unit and a Frame Grabber Side Unit connected by duplex,
multi-mode, fiber-optic cables to allow Camera Link video support up to 500 meters (1640 feet) from the host computer with no
loss of signal or resolution and without the use of amplifiers or repeaters of any kind.
With Thinklogical’s industrial enhancements, the Camera Fiber-Link System is ideal for any application.
 Supports all Camera-Link base/medium/full configurations with a pixel clock from 20-85MHz.
 Threaded screw-lock input power connectors
 Compact, light-weight design
(CFL-003000-LCTX)
(CFL-003000-LCRX)
CPU
Local Display
Ext en d Distribu te In no vate ®
Ext en d Distrib u te In novate ®
5
PHONE: 1-800-291-3211
WEBSITE: www.thinklogical.com
EMAIL: support@thinklogical.com
Trust Our Proven Ingenuity
®
Value Your Content
  • Page 1 1

Thinklogical Camera Fiber-Link 3000 Quick start guide

Thinklogical
Brand
Thinklogical
Model
Camera Fiber-Link 3000
Category
Network media converters
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents