For assistance with assembly, contact:
Southern Enterprises Inc.
Customer Service 1-800-633-5096
www.seidal.com
BC947200TX
Large Apothecary Storage Bench
Assembly Instructions
PO#:
Page1
Large Apothecary Storage Bench
Parts List
Please check packaging for all parts and hardware before discarding. Unpack and lay parts on clean, padded
surface like carpet or blanket. Check that you have all parts indicated. Call customer service if hardware is missing.
Before beginning assembly, carefully study the diagrams below and sort your hardware according to the pictures.
Using the incorrect hardware will cause damage.
A.
Quantity
of 1
top panel
B.
Quantity
of 1
apron back panel
C.
Quantity
of 2
apron side panel
D.
Quantity
of 1
left side frame
E.
Quantity
of 1
right side frame
F.
Quantity
of 1
left vertical panel
G.
Quantity
of 1
right vertical panel
H.
Quantity
of 1
bottom panel
I.
Quantity
of 2
adjustable shelf panel
J.
Quantity
of 1
upper back rail
K.
Quantity
of 1
lower back rail
L.
Quantity
of 1
front rail
Page2
M.
Quantity
of 1
back panel
N.
Quantity
of 1
middle leg
O.
Quantity
of 2
drawer front panel
P.
Quantity
of 2
drawer left side panel
Q.
Quantity
of 2
drawer right side panel
R.
Quantity
of 2
drawer back panel
S.
Quantity
of 2
drawer bottom panel
T.
Quantity
of 1
seat cushion
1.
Quantity
of 20
wood dowel
2.
Quantity
of 38
cam bolt
3.
Quantity
of 38
cam lock
4.
Quantity
of 8
shelf pin
5.
Quantity
of 14
screw ø1/8”x1/2”l
6.
Quantity
of 4
bolt
Page3
7.
Quantity
of 5
bolt ø1/4”*1-1/2”l
8.
Quantity
of 2
bolt ø1/4”*7/8”l
9.
Quantity
of 5
screw ø1/8”x1”l
10.
Quantit
y
of 8
handle
11.
Quantity
of 16
screw ø1/8”x1/2”l
12.
Quantity
of 8
sticker cover
Care and Cleaning Instructions:
Before using, wipe with a clean, dry cloth.
Periodically apply furniture wax to renew
the finish. Avoid rubbing or scratching the
surface with rough or abrasive objects.
For replacement parts or questions, please
call customer service at 1-800-633-5096.
Assembly Tool Required No.2 Phillips
Screwdriver (Not Included)
Page4
Figure 1
Connect Apron back panel (B) to apron
side panels (C) with bolts (7) and wood
dowels (1).
Tighten bolt (7) with phillips screwdriver
as shown.
Figure 2
Connect assembled to top panel (A) with
bolts (7) and wood dowels (1).
Tighten bolts (7) with phillips
screwdriver.
Page5
Large Apothecary Storage Bench
Assembly Instructions
Figure 3
Insert cam locks (3) into holes on drawer
back panel (R).
Screw cam bolts (2) into holes on
drawer left side panel (Q) and drawer
right side panel (P).
Attach drawer left side panel (Q) and
drawer right side panel (P) to drawer
back panel (R) by inserting cam bolts (2)
into corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 4
Slide drawer bottom panel (X) into the
grooves of right drawer side panel (P),
left drawer side panel (Q), and drawer
back panel (R).
Page6
Figure 5
Insert cam locks (3) into holes
on assembled unit.
Screw cam bolts (2) into holes on
drawer front panel (O). Attach
assembled unit to drawer front panel (O)
by inserting cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 6
Cover cam lock holes with sticker covers
(12).
Connect handles (10) to drawer front
panel with screws (11).
Tighten screws (11) with phillips
screwdriver.
Page7
Figure 7
Insert cam locks (3) into holes on bottom
panel (H).
Screw cam bolts (2) into holes on lower
back rail (K) and front rail (L). Attach
lower back rail (K) and front rail (L) to
bottom panel (H) by inserting wood
dowels (1) and cam bolts (2) into
corresponding holes until lower back rail
(K),front rail (L), and bottom panel (H)
meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 8
Insert cam locks (3) into holes on
vertical panels (F) and (G).
Screw cam bolts (2) into holes on
assembled unit. Attach vertical panels
(F) and (G) to assembled unit on by
inserting wood dowels (1) and cam bolts
(2) into corresponding holes until they
meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Page8
Figure 9
Insert cam locks (3) into holes on
assembled unit.
Screw cam bolts (2) into holes on left
frame (D) and right frame (E). Attach left
frame (D) and right frame (E) to
assembled unit by inserting cam bolts
(2) into corresponding holes until they
meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Figure 10
Insert cam locks (3) into holes
on assembled unit .
Screw cam bolts (2) into holes on
underside of top panel (A). Attach top
panel (A) to assembled unit by inserting
wood dowels (1) and cam bolts (2) into
corresponding holes until they meet.
Tighten by rotating cam locks (3)
clockwise with phillips screwdriver.
Page9
Figure 11
Connect upper back rail (J) to top panel
with screws (9).
Tighten screws (9) with philips
screwdriver.
Attach middle leg (N) to bottom panel as
shown, tighten by hand.
Figure 12
Connect back panel (O) to assembled
unit with screws (5).
Tighten screws (5) with philips
screwdriver.
Page10
Figure 13
Install shelf pins (4) to assembled unit.
Install two adjustable shelves (I) in the
arrows direction. Make sure the shelf
pins (4) hold the adjustable shelves (I)
stably.
Figure 14
Screw bolts (6) into holes on side legs
as shown.
Attach assembled drawer box into
assembled unit.
Make sure the bolt (6) hold the drawer
box stably.
Page11
Figure 15
Place seat cushion (T) on top panel as
shown in figure 15.
Figure 16
Now your new large Apothecary storage
bench is ready to use.
Page12
Please immediately examine this product carefully. Any request for missing parts or damage replacement
must be received within 90 days of your receipt of the product. Replacement, if available, will be honored
within this time frame. Parts will not be available for items arriving fully assembled. We do not recommend
modifying product(s) and we are not responsible for any damages due to product modification(s).
If
damages or missing parts are not reported within 90 days of your receipt, we are under no obligation to
provide parts or replacement merchandise.
Please contact Southern Enterprises at 800-633-5096 or in Dallas 972-869-0111/ 9am – 4pm Mon-Fri
Central time if you have product issues or email us at serv[email protected]. Please ask for customer service
representative for issues involving damages or replacement parts. Please ask for technical assistance
representative for any issues with product and assembly/construction.
Please contact the retailer that you purchased from for returns.
Customer Information
Name
Address
City/State/Zip Code
Phone Number
Please indicate where you purchased this item: Store/Website/Catalog
Please indicate color/size/style number:
Style No Parts Letter Parts Description Quantity Needed
Parts Replacement Form
Customer Service 1-800-633-5096
Southern Enterprises, Inc.
600 Freeport Parkway, Suite 200
Coppell, Texas 75019
Page 4
Page11
/
