2. BEA
  3. LZR-MICROSCAN T

BEA LZR-MICROSCAN T Template

  • Hello! I am an AI chatbot trained to assist you with the BEA LZR-MICROSCAN T Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
microscan
*
*
*
*
*
75.5924.01 LZR-MICROSCAN T Y-HARNESS MOUNTING TEMPLATE 20180614
Reference LZR-microscan T User’s Guide 75.5753 for full installation instructions
MOST BUTT HUNG
MOST CENTER PIVOT
DISTANCE FROM
TOP OF DOOR
MOUNTING HEIGHT RANGE: 75 – 98”
(measured from nished oor to sensor LED)
Scan for Product Info
DISTANCE FROM
EDGE OF DOOR
sensor
mounting
1/8”
spacer
mounting
1/8”
LEFT
MOUNT
NOTES (READ PRIOR TO MOUNTING):
Survey both sides of door to determine appropriate mounting
location (distance from pivot edge and distance from top of
door), taking into account the frame clearance, nger guard,
door arm, etc. Sensors are to be mounted as close to the top of
the door and as close to the hinge of the door as possible.
Spacer required for applications with hardware extending across
width of door and protruding more than 2 in.
For narrow-style aluminum doors, mounting arm kit may be
used. When using mounting arm kit, do not use this template.
Verify dimensions
aer printing.
1”
1”
Print settings must be set to “ACTUAL SIZE.”
SYMBOL KEY
SPACER MOUNTING HOLES
SENSOR MOUNTING HOLES
OPTIONAL SENSOR MOUNTING HOLES
MOUNTING INSTRUCTIONS
STEP 1: Fold along appropriate horizontal and vertical lines and
then align with pivot edge and top of door.
STEP 2: Mark and drill two (2) holes.*
STEP 3: Flip template and repeat for right sensor.
* When using spacer, drill any two (2) spacer mounting holes
instead of sensor mounting holes.
* When using optional mounting holes, it may be necessary to
remove end caps or sensor from base.
microscan
*
*
*
*
75.5924.01 LZR-MICROSCAN T Y-HARNESS MOUNTING TEMPLATE 20180614
*
MOST BUTT HUNG
MOST CENTER PIVOT
DISTANCE FROM
TOP OF DOOR
RIGHT
MOUNT
Scan for Product Info
DISTANCE FROM
EDGE OF DOOR
Verify dimensions
aer printing.
1”
1”
sensor
mounting
1/8”
spacer
mounting
1/8”
NOTES (READ PRIOR TO MOUNTING):
Survey both sides of door to determine appropriate mounting
location (distance from pivot edge and distance from top of
door), taking into account the frame clearance, nger guard,
door arm, etc. Sensors are to be mounted as close to the top of
the door and as close to the hinge of the door as possible.
Spacer required for applications with hardware extending across
width of door and protruding more than 2 in.
For narrow-style aluminum doors, mounting arm kit may be
used. When using mounting arm kit, do not use this template.
MOUNTING INSTRUCTIONS
STEP 1: Fold along appropriate horizontal and vertical lines and
then align with pivot edge and top of door.
STEP 2: Mark and drill two (2) holes.*
STEP 3: Flip template and repeat for right sensor.
* When using spacer, drill any two (2) spacer mounting holes
instead of sensor mounting holes.
* When using optional mounting holes, it may be necessary to
remove end caps or sensor from base.
Print settings must be set to “ACTUAL SIZE.”
MOUNTING HEIGHT RANGE: 75 – 98”
(measured from nished oor to sensor LED)
Reference LZR-microscan T User’s Guide 75.5753 for full installation instructions
SYMBOL KEY
SPACER MOUNTING HOLES
SENSOR MOUNTING HOLES
OPTIONAL SENSOR MOUNTING HOLES
/