BEA Industrial Bracket User guide

Type
User guide

This manual is also suitable for

75.5799.03 INDUSTRIAL BRACKETS 20160216 Page 1 of 2
INDUSTRIAL BRACKET
Universal industrial mounting bracket
ENGLISH
1. 12’’ x 2.5’’ mounting face (fasteners not included)
2. adjustment locking screws
3. extendable adjustment
4. sensor mounting face
1
2
3
4
TECHNICAL SPECIFICATIONS
DESCRIPTION
Material: Carbon Steel (powder coated black)
Adjustment: 20-36 inches
Weight: 5.38 lbs
Specifications are subject to changes without prior notice.
All values measured in specific conditions.
5. IXIO / Wizard / Iris
6. DK12
7. Eagle HM
24/7 Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: T[email protected] | Tech Docs: www.beasensors.com
8. wire passage hole
9. Falcon / IS40 / IS40P
10. LZR family
5 6
7
8 9
10
6. IXIO
7. Eagle HM
8. Falcon / IS40 / IS40P
9. LZR - microscan (centered mounting)
75.5799.03 INDUSTRIAL BRACKETS 20160216 Page 2 of 2
Short universal industrial mounting bracket
ENGLISH
1. 12’’ x 2.5’’ mounting face (fasteners not included)
2. adjustment locking screws
3. extendable adjustment
4. sensor mounting face
5. angle locking bolt
1
2
3
4
TECHNICAL SPECIFICATIONS
DESCRIPTION
Material: Carbon Steel (powder coated black)
Adjustment: 6-12 inches (up to 4 inches maybe cut off for shorter application)
Adjustment tool: 5/16 Allen Wrench
Weight: 2.32 lbs
24/7 Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: T[email protected] | Tech Docs: www.beasensors.com
6
8
7
9
5
10. LZR - microscan (right mounting)
11. LZR - microscan (left mounting)
12. LZR family *
13. wire passage hole
Specifications are subject to changes without prior notice.
All values measured in specific conditions
11
10
12
*Mutiple mounting options available refer to LZR mounting template
13
MINI INDUSTRIAL BRACKET
  • Page 1 1
  • Page 2 2

BEA Industrial Bracket User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI