StyleWell 1004100289 Operating instructions

Brand
StyleWell
Model
1004100289
Type
Operating instructions

This manual is also suitable for

We appreciate the trust and confidence you have placed in Stylewell through the purchase of this Colemont
THANK YOU
Curved Back Bed - Full/Queen/King. We strive to continually create quality products designed to enhance
your home.
Visit us online to see our full line of products available for your home improvement needs.
Thank you for choosing stylewell!
Colemont Curved Back Bed - Full/Queen/King
Questions, problems, missing parts?
Before returning tothestore,callCustomerService.
8a.m.
–
7 p.m.,EST,Monday
–
Friday,9a.m.
–
6 p.m.
,
EST,Saturday
1-877-527-0313
HOMEDEPOT.COM
Item #:1004100293
Model #: XMB2011-bed
:1004100287
:1004100294
:1004100289
Table of Contents
2
Safety Information
3
Maintenance
12
Warranty
4
Care and Cleaning...........................
12
What is Covered
4
What is not Covered
4
Pre-Assembly
4
Planning Assembly
4
Hardware Included
4
Package Contents
5
Assembly
6
Table of Contents
..............................................................
..............................................................
..............................................................................
....................................................
............................................
..............................................................
...............................................
...............................................
...............................................
............................................................................
.....................................
2
Safety Information
3
Pleasereadand understandthisentiremanualbeforeattemptingto assemble, operateor installtheproduct. If
youhaveany questionregardingthe product,pleasecall customerserviceat 1-877-527-0313,8a.m. –7 p.m.,
EST,Monday –Friday,9a.m. –6p.m.,EST,Saturday
□ Readtheseinstructionscarefullyandretainthemforfuture use. Ifthisproduct is passedtoathirdparty,
thentheseinstructionsmustbeincluded.
□ Whenusingtheproduct,basicsafetyprecautionsshouldalwaysbefollowedtoreducetheriskofinjury
includingthe following:
□ Ensure there are no missing parts priorto assembly.
□ Assemble the productonacarpetto prevent damage.
□ Becareful notto cross-threadscrewsand do not use powertools.
□ Before usingthe productbesurethat it iscompletely andproperlyassembled.
□ Two peoplearerequiredfor assembly.
□ Assembly to becarriedout bycompetent adultsonly.
□ During assemblychildren shouldbekept awayfromthe productto avoidpossiblerisk of injury.
□ Keep all hardwareparts awayfrom children.
□ Dispose of plasticpackaging materialimmediately to avoid anyrisk ofsuffocation.
□ Regularlycheckscrews to ensuretheyare tightened securely.
W
A
R
N
I
N
G
:
Keepallhardwarepartsawayfromchildren
W
A
R
N
I
N
G
:
Beforeassembly,carefullyusescissorsorautility
knife tocutandunwrapallparts.Makesureyoudo
notdiscard thehardware.
W
A
R
N
I
N
G
:
Disposeplasticpackagingmaterialimmediately to
avoidany riskofsuffocation tochildrenandanimals.
Warranty
1
Y
E
A
R
W
A
R
R
A
N
T
Y
W
HATISCOVERED
e guaranteethisproductto befree of manufacturing defects tothe original purchaserfor oneyear.
W
HATISNOTCOVERED
T
hiswarranty does notcover commercial use, acts of nature,and abusiveuse.
PlanningAssembly
□
Removeall packaging materials,staplesand packing straps fromthecarton.
□
RefertoParts List andHardware List, andensurepartsandhardwarearecorrect beforeassembly.
□
Contact customer servicefor missing parts.
□
Placeallwoodenpartsonaclean,flatandsoftsurface(e.g.carpetorrug)topreventscratchanddamage
to parts
HardwareIncluded
NOTE: Hardwarenotshowntoactualsize.
Pre
-Assembly
4
AA
BB
CC
DD EE
BB
CC
DD
EE
FF
FF
GG
GG
Part
Description
Quantity
AA
8*50mm
10
21
1
7
4
4
8
8*20mm
HH
HH
4
Screw Ø8X50
Washer
Allen Key
Screw Ø8X35
Screw Ø6X90
Screw Ø6X23
Screw Ø8X20
Wooden Dowel
Pre-Assembly(cont.)
5
A
B
C
D
E
F
G
Part
Description
Quantity
PACKAGE CONTENTS
1
H
I
J
2
K
L
1
3
Headboard
Headboard Left Leg
Headboard Right Leg
Headboard support bar
Footboard
Footboard Right Leg
Footboard Left Leg
Left Sideboard
Right Sideboard
Slat
Center Support
Metal Legs
1
1
1
1
1
1
1
1
6
A
ssembly
G
F
1.Place footboard left leg (G) and right legs (F) with the 4
holes facing up as shown and insert wood dowel (GG) into
the middle two holes.
2.Take out the left sideboard (H) and right sideboard (I) and
insert wood dowel (GG) into the side two holes as shown
photos.
7
A
ssembly
3.Assemble legs to headboard.
Take out the headboard(A),headboard left leg(B),headboard right leg(C) and put the headboard(A)
exterior side facing up as shown.
4.Turn assembled headboard over,fasten the headboard
support bar(D) to the 2 holes in leg(B and C) with screw(DD)
fitted with washer(BB).Use allen key(CC) to drive(DD).
Fasten leg(B) and leg(C) to headboard (A) with screw(AA) fitted with washer (BB).Use allen
key(CC) to drive(AA).
(Cont.)(Cont.)
8
A
ssembly
(Cont.)(Cont.)
5.Assemble legs (F and G) to footboard (E).
Place footboard(E) with the interior side facing up as shown.
Attach leg (F) and leg (G) from step 1 to footboard (E) via wood dowels, and fasten with screw
(AA) fitted with washer (BB). Use allen key (CC) to drive (AA).
6.Fasten metal leg (L×3) to center support (K) with screw(DD)
fitted with flat washer (BB) .use allen key (CC) to drive (DD) .
9
A
ssembly
(Cont.)(Cont.)
7.Assemble sideboard (H and I) to footboard (E)
Position footboard (E) vertically.
8.Assembly bed frame from step 7 to the headboard from step 4.
Insert the screw (FF) to the 2 holes on sideboard(H and I).
Fasten the sideboard (H and I) to the headboard legs (B and C) with screw (EE) . Use allen key (CC)
to drive (EE).
Attach sideboard (H and I) to footboard (E) by fitting the bracket hooks on (H and I) into the
bracket slots on footboard (E) .
10
A
ssembly
(Cont.)(Cont.)
9.Attach cent support (K) to footboard (E) and headboard support
bar (D) with screws (HH) fitted with washer (BB) by allen key (CC).
11
A
ssembly
(Cont.)(Cont.)
10.Lay the 2 sets of slat (J) to fit on the rail on the sideboards.
Check and ensure that the designated slat on each set is firmly affixed to the raill on the sideboard.
Remove adhesive covering from the 2 pieces of slate.
The assembly of the bed platform is complete.
12
Maintenance
□
Keepthe product awayfromdirectheat andsunlight.
□
Prolongedexposure toheat sourcesmaycausescorching,or evencausecolortofade.
□
Regularvacuuming or light brushing helps toremove dirt and prevent soilbuild-up,which increasesthe
appearancewear.
□
Periodically(every90 days) make sure thatthescrewsare fullytightened.
Careand Cleaning
□
Handlewith care.
□
Usea slightlydamp clothto cleantheproduct. Donot use bleachor useabrasivecleaning material.
□
Checkallthe fittings periodicallyandre-tighten as necessary. Donotuse the product if any ofthe partsis
damaged or broken.
□
Never allow anykind of liquidtoremainonyourfurniture.
□
Absorption canmakewoodwrapordelaminate.
□
Do not place hot items (e.g. hot drinks)directly ontothewood surface.
□
Do not drag and/orpull the furniture.
□
Never use harsh chemicalsorsolventsonyour product as thismay damagethe metal.
□
Marks and stainsfrompens,crayonsand inkmarkersaredifficulttoremove.Intheeventthatyourproduct
becomepermanentlystained,werecommendthatyouconsult aprofessional
13
Ques
tions, problems, missing parts?
Before returning to the store, call Customer Service.
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-877-527-0313
HOMEDEPOT.COM
Retain this manual for future
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

StyleWell 1004100289 Operating instructions

Brand
StyleWell
Model
1004100289
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents