2. Golden Lighting
  3. 055MPSBZ

Golden Lighting 055MPSBZ Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Golden Lighting 055MPSBZ Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Assembly Instructions: 1051-5 (Hidalgo)
IMPORTANT:
• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.
• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!
• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!
PREPARING FOR INSTALLATION
Remove all of the contents from the carton. See the important notes above. Shut off
thepoweratthecircuitbreakerandcompletelyremovetheoldxturefromtheceiling,
including the old mounting strap.
From the parts bag remove the mounting strap assembly. One end of nipple (F) should
beattachedtomountingstrap(A)withwasherandhexnut(C,D)inplace.Theother
end should have canopy loop (H) attached. Attach mounting strap (A) to the junction
boxusingmountingscrews(B)andascrewdriver.Tightensecurely.Unscrewcanopy
loop collar (I) from canopy loop (H). Pass canopy (G) over the mounted canopy loop
totesttheheight.Approximatelyhalfofthecanopyloop’sexteriorthreadsshouldbe
exposed,andthecanopyloopcollarshouldtsnuglyontothecanopyloop.Remove
canopy (G) and adjust the height of nipple (F) and canopy loop (H) until the desired
height is reached.
ASSEMBLING THE FIXTURE
Takethexture’sbodyoutofthebox.Arms(N)ofthextureareclosedinthe
packaging. Gently spread the arms until they are evenly spaced. Place center ring
(T) up to arms (N) and line up the holes in metal clip (S) of the center ring so that
they pass over screw posts (R). Secure the ring to the arms by threading deco nut
(U)ontoscrewpost(R).Toploop(L)maybeonthexture’swires,butnotthreaded
ontothexture’sframeatpost(M).Ifitisnotconnected,pullthexture’swires
throughtoploop(L)beforetwistingtoploop(L)ontopost(M)ofthexture’sbody.By
measuring,determinethecorrectnumberofchainlinksneededforproperhanging
height.Ifnecessary,useapairofplierstoopenandremoveanyexcesschain.Attach
chain connectors (K) to each end of chain (J) before attaching one end of the chain
connector/chain to top loop (L). Close the chain connector. Connect the other chain
connector(K)tocanopyloop(H).Feedthexture’swiresupthroughtoploop(L)then
through chain (J) (every three links or so). Pull the wires until taut. Slide canopy loop
collar (I) and canopy (G) onto the chain/wire.
CONNECTING THE WIRES
Haveanassistantsupporttheweightofthexturewhilecompletingthewiring.Cut
awayexcesswire.Threadthexture’swiresthroughcanopyloop(H)andnipple(F).
Attachthexture’swirestothepowersupplywiresfromthejunctionbox.Connect
black to black (or smooth); white to white (or ribbed); ground to ground (green or
copper).Twisttheendsofthewirepairstogether,andthentwistonawireconnector.
Make sure all twists are in the same direction. If there is no ground wire (green or
copper)comingfromthejunctionbox,locategroundscrew(E)onmountingstrap
(A)andwrapthexture’sgroundwirearoundthegreengroundscrew(E).Usea
screwdriver to secure ground screw (E) onto the mounting bracket. Tuck all wires
neatlyintothejunctionbox.
FINISHING THE INSTALLATION
Push canopy (G) up to the ceiling and slide canopy loop collar (I) up beneath the
canopy. Tightly thread canopy loop collar (I) onto canopy loop (H) to secure canopy (G)
in place.
Slide glass shade (P) over socket (Q) and secure in place with socket ring
(O).Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.
Donotexceedthemaximumrecommendedwattage.
Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
For Customer Service, contact
the place of purchase to arrange
for replacement parts.
BLACK
(Hot)
WHITE
(Neutral)
GREEN
(Ground)
HOUSE WIRES
SMOOTH
(Or Black)
FIXTURE WIRES
RIBBED
(Or White)
BARE COPPER
(Or Green)
A
B
C
D
E
F
G
H
I
J
K
L
M
O
P
Q
R
S
U
N
T
/