Golden Lighting 7035-5P BLK Installation guide

Brand: Golden Lighting

Model: 7035-5P BLK

Type: Installation guide

Golden Lighting 7035-5P BLK is a customizable ceiling-mounted light fixture. It comes with a mounting strap, canopy loop, nipple, and chain, allowing you to adjust the height of the fixture to your preference. The fixture has five arms, each with a metal ring and a candle sleeve. You can slide the arms and rings apart to create different spacing and arrangements. The fixture supports up to five light bulbs, which are not included, and it is recommended that you do not exceed the maximum wattage specified in the instructions.

Assembly Instructions: 7035-3P/5P (Quinn)

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Removeallofthecontentsfromthecarton.Seetheimportantnotesabove.Removetheoldxturefromtheceiling,includingtheold

mountingstrap.

1.Takethemountingstrapassemblyfromthepartsbag.Oneendofnipple(F)shouldbeattachedtomountingstrap(A)withawasher

andhexnut(CandD)inplace.The other end should have canopy loop (H) attached.

2.Useascrewdriverandmountingscrews(B)toattachmountingstrap(A)tothejunctionbox.(Unscrewcanopyloopcollar(I)from

canopyloop(H).Passcanopy(G)overthemountedcanopylooptotesttheheight.Approximatelyhalfofthecanopyloop’sexterior

threadsshouldbeexposed,andthecanopyloopcollarshouldtsnuglyontothecanopyloop.Removecanopy(G)andadjustthe

heightofnipple(F)andcanopyloop(H)untilthedesiredheightisreached.)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, contact

the place of purchase.

FINISHING THE INSTALLATION

10.Pushcanopy(G)uptotheceiling.Slidecanopyloop(H)andcanopyloopcollar(I)upbeneaththecanopy.Tightlythreadcanopyloop

collar (I) onto canopy loop (H) to secure canopy (G) in place.

11.Slidecandlesleeves(V)oversockets(W).Adjustuntilthecandlesleevesarestraight.

12.Installlightbulbs(notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended

wattage.

Yourinstallationiscomplete.Turnonthepowerandtestthexture.

ASSEMBLING THE FIXTURE

3.Nut(T)androd(S)areonthexture’swires.Threadnut(T)androd(S)ontopost(U).Thentwistrod

(S) onto post (R).

4.Metalrings(XXandAA)aswellasxturearms(Z)areatforpackagingpurposes.

5.Slidearms(Z)andmetalrings(XandAA)apartuntiltheringsare equally spaced apart.

6.Nuts(OandP),nipple(N),topcap(M)andtoploop(L)areonthexture’swires,butnotattached.

Thread nut (P) onto the bottom of nipple (N). Thread the bottom of nipple (N) into post (Q) before

threadingnut(O)ontothetopofnipple(P).Screwtopcap(M)andtoploop(L)ontothethreadsof

nipple (N).

7.Bymeasuring,determinethecorrectnumberofchainlinksneededforproperhangingheight.If

necessary,useapairofplierstoopenandremoveanyexcesschain.Attachchainconnectors(K)to

eachendofchain(J)beforeattachingoneendofthechainconnectorandchaintotoploop(L).Close

thechainconnector.Connecttheotherchainconnector(K)tocanopyloop(H).Feedthexture’swires

upthroughtoploop(L)thenthroughchain(J)(everythreelinksorso).

8.Pullthewiresuntiltaut.Gentlyslidecanopyloopcollar(I)andcanopy(G)ontothechain/wires.

CONNECTING THE WIRES

9.Haveanassistantsupportthexture’sweightwhilecompletingthe

wiring.Refertothewiringdiagrambelowandattachthexture’swires

tothepowersupplywiresfromthejunctionbox.ConnectHottoHot,

NeutraltoNeutral,andGroundtoGround.Twisttheendsofthewire

pairstogether,andthentwistonawireconnector.Makesurealltwists

areinthesamedirection.Ifthereisnohousegroundwirecomingfrom

thejunctionbox,locategroundscrew(E)onthemountingbracket/

mountingstrapandwrapthexture’sgroundwirearoundtheground

screw.Useascrewdrivertotightenthetopofgroundscrew(E)ontothe

wiresandintothemountingbracket/mountingstrap.Tuckthewiresinto

thejunctionbox.

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

House Wires

Fixture Wires

Hot

Golden Lighting 7035-5P BLK Installation guide

Golden Lighting 7035-5P BLK Installation guide

Golden Lighting 7035-5P BLK Installation guide

Related papers

Other documents