Enabling Devices 506 User manual

Brand
Enabling Devices
Model
506
Type
User manual

Enabling Devices 506 is a multi-sensory toy designed to provide visual, auditory, and tactile stimulation. It features a clear plastic tube with colorful beads that cascade through when activated by a built-in switch or an external capability switch. As the beads move, multicolored lights blink, and one of six upbeat songs plays. A mirror is also mounted on the bottom for visual effects. The toy includes an ON/OFF/VOLUME knob and an ON/OFF Vibration toggle switch, allowing you to adjust the volume and add vibration for additional sensory input.

Enabling Devices 506 is a multi-sensory toy designed to provide visual, auditory, and tactile stimulation. It features a clear plastic tube with colorful beads that cascade through when activated by a built-in switch or an external capability switch. As the beads move, multicolored lights blink, and one of six upbeat songs plays. A mirror is also mounted on the bottom for visual effects. The toy includes an ON/OFF/VOLUME knob and an ON/OFF Vibration toggle switch, allowing you to adjust the volume and add vibration for additional sensory input.

For Technical Support:
For Technical Support:For Technical Support:
For Technical Support:
Call our Technical Service Department
Monday through Friday, 9 a.m. to 5 p.m. (EST)
1-800-832-8697
customer_support@enablingdevices.com
Topsy Turvy #506
USER’S GUIDE
50 Broadway
Hawthorne, NY 10532
Tel. 914.747.3070 / Fax 914.747.3480
Toll Free 800.832.8697
www.enablingdevices.com
Tons of fun!
Tons of fun!Tons of fun!
Tons of fun!
Watch the colorful beads cascade through the turning clear plastic
tube when you activate the attached switch or your own capability
switch. Multicolored lights blink and six upbeat songs play.
A mirror is mounted on the bottom for great visual effects. Vibration
can be turned on or off. A perfect cause and effect experience which
also increases visual attention. Size: 15"L x 10½"W x 9¼"H. Requires
and 4 C and 4 AA Batteries. Weight: 4¼ lbs.
1. Topsy Turvy requires 4 C & 4 AA batteries (not included). Use
Alkaline batteries only (e.g. Duracell or Energizer brand). Do not
use rechargeable batteries or any other type of batteries because
they supply lower voltage and the unit will not perform properly.
The battery compartments are located on the bottom of the unit’s
base. To access the compartments remove the Phillips Head
screws from each battery compartment. Install the AA and C size
batteries into their appropriate holder. When installing new
batteries, always be careful to observe battery polarity. Replace
battery covers and screws. Never mix old and new batteries
together or different brands or types together.
2. Turn the ON/OFF/VOLUME knob clockwise, you will hear an
auditable click. Adjust to knob for desired volume level of the
music. There is also an ON/OFF Vibration toggle switch on the
back of the unit. This will add vibration when the Topsy Turvy’s
switch is activated. Topsy Turvy can be used with or without the
vibration function.
External Switch Use:
External Switch Use:External Switch Use:
External Switch Use:
3. You can plug in any external capability switch into Topsy Turvy via
the switch jack located on the side of the unit. Topsy Turvy has a
standard 1/8” switch input jack. When plugging in your switch
make sure it is plugged in all the way. There should be no gaps
between the connections.
4. Simply activate the built in switch on the front of the unit, or your
own external switch to watch the action of the colorful beads
cascading through the motorized turning clear tube. Multi colored
lights blink, 1 of 6 upbeat songs play and a mirror is mounted to
the bottom to give you a view of the exciting happenings.
Troubleshooting:
Troubleshooting:Troubleshooting:
Troubleshooting:
Problem:
Problem:Problem:
Problem: Topsy Turvy’s lights, music or vibration do not work when the
built in switch or external switch is activated.
Action #1:
Action #1: Action #1:
Action #1: Make sure the ON/OFF/VOLUME knob is turned.
Action #2
Action #2Action #2
Action #2:
::
: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Problem:
Problem:Problem:
Problem:
Topsy Turvy does not play music.
Action #1:
Action #1: Action #1:
Action #1: Make sure the ON/OFF/VOLUME knob is turned ON and
set at an auditable level.
Action
ActionAction
Action
#2
#2#2
#2:
::
: Check the Batteries for strength and for proper battery
polarity. Replace if weak or dead.
Problem:
Problem: Problem:
Problem: Topsy Turvy does not work at all.
Action:
Action: Action:
Action: Check all Batteries for strength and for proper battery polarity.
Replace if weak or dead.
Care of the Unit:
Care of the Unit:Care of the Unit:
Care of the Unit:
Topsy Turvy can be wiped clean with any household multi-purpose,
non-abrasive cleaner and disinfectant. We recommend Simple Green,
which is a non toxic biodegradable all-purpose cleaner.
Do not use
Do not useDo not use
Do not use abrasive cleaners, as they will scratch the surface of the
unit.
Do not submerge
Do not submergeDo not submerge
Do not submerge the unit, as it will damage the electrical
components.
Rev
Rev Rev
Rev 1/26/17
1/26/171/26/17
1/26/17
  • Page 1 1
  • Page 2 2

Enabling Devices 506 User manual

Brand
Enabling Devices
Model
506
Type
User manual

Enabling Devices 506 is a multi-sensory toy designed to provide visual, auditory, and tactile stimulation. It features a clear plastic tube with colorful beads that cascade through when activated by a built-in switch or an external capability switch. As the beads move, multicolored lights blink, and one of six upbeat songs plays. A mirror is also mounted on the bottom for visual effects. The toy includes an ON/OFF/VOLUME knob and an ON/OFF Vibration toggle switch, allowing you to adjust the volume and add vibration for additional sensory input.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents