Jade Bath 8011-01-10 Installation guide

Type
Installation guide

This manual is also suitable for

Jade Bath 8011-01-10 is a thermostatic rain shower faucet made of high-quality materials that ensure durability and longevity. It's simple to install, featuring adjustable S-connectors, decorative covers, and clear instructions. The faucet allows you to enjoy a relaxing and invigorating shower experience, thanks to its top shower and handle shower options. The multifunctional handle provides effortless control over water flow and temperature, while the security stop at 38℃ ensures safety during use.

Jade Bath 8011-01-10 is a thermostatic rain shower faucet made of high-quality materials that ensure durability and longevity. It's simple to install, featuring adjustable S-connectors, decorative covers, and clear instructions. The faucet allows you to enjoy a relaxing and invigorating shower experience, thanks to its top shower and handle shower options. The multifunctional handle provides effortless control over water flow and temperature, while the security stop at 38℃ ensures safety during use.

SHOWER FAUCET
ROBINET DE DOUCHE
POUR MODÈLE / FOR MODEL: 8011-01-10
Manuel D’Instruction
Instruction Manual
JADE BATH 11111 RUE COLBERT, ANJOU, QC, H1J 2S1 TEL: 1.866.333.0555 - JADEBATH.COM - INFO@JADEBATH.COM
Installation drawing
Product accessories
Application
Warranty
Data Sheet
808001-607(20171220)
Thermostatic rain shower faucet
8011-01-10
12.Bent pipe
15.Top shower
11.Fix stand set
10.Bracket
9.Shower pipe
1.Mixer
2.Nut
3.S-connector
4.Decorative cup
8.Multifunctional handle
7.Multifunctional cartridge
6.Thermostatic Cartridge
5.Temperature control handle
13.Flexible hose
14.Handle shower
5
1
4
14
3
8
Ø2
3
8
30
5
8
Ø
13
16
2-G1/2
2-Ø2
3
8
3
1
4
Ø
7
8
5
7
8
35
7
16
~39
3
8
34
9
16
~52
5
16
Ø8
7
8
1. Supply lines should be purged to clean impurities before
connecting the unit (hot water on left, cold water on right).
2. Screw the S-Connectors
(3) into supply lines. The S-Connectors
can be adjusted in
5
7
8
±
13
16
inch, from hot water supply to cold
water supply so that the mixer
(1) can be adjusted during
installation.
3. Put decorative covers
(4) on the S-Connectors closely to the wall.
4. Put the washers into the nuts
(2) of the mixer(1), and then
screw the nuts to tighten the mixer onto the S-Connectors. The
mixer should be aligned with the wall and floor horizontally. The
hot water supply should be connected to the left and the cold
water supply to the righ
t.
5. Put the washer into the nut of the shower pipe
(9). Insert the
shower pipe
(9) onto the mixer(1), and then tighten it.
6. Mark a suitable position on wall and drill two nail holes, then put
the nuts into the nail holes until it is the same level with the wall.
Install the fixed stand on it and cover with decorative cup
(4).
Check if it is fixed well.
7. Fix the bracket
(10)onto the shower pipe in a suitable position.
Put washers into the hose
(13) connections, one piece of each,
and then tighten the hose to the water outlet and the handle
shower. Last install the shower head
(15)onto the shower pipe
(12). Please make sure all washers and rings are well installed.
8. Leakage test: turn on/off the temperature control handle
(5) and
multifunctional handle. If no leakage is found, the installation is
done.
Installation Instructions
1. Turn on the multifunctional handle; water will come out from
top shower or handle shower.
2. The securi
ty stop is 38 . Press the security stop and turn the
handle forward and back, water temperature will become hotter
or colder.
Cleaning and Maintenance
1. Use soap and water to remove lime stains from chrome surface.
Don't use acidic detergents, scouring pads or steel wool;
otherwise the chrome parts will get damaged
2. Use soap and water to clean installation accessories, such as
plastic or rubber components. Don't use acidic detergents,
scouring pads, al
cohol cleaners or steel wool.
Jade bath warrants its faucets to be leak and drip free during
normal residential use for 1 year from original date of purchase.
If the faucet should leak or drip during normal use, kindly contact
our support team. Damages caused by accident, misuse or abuse
will void-this warranty. Under this warranty, you(the customer),
is entitled to replacement parts at no cost to repair and restore
functionality if any part of the product were to fail. NO labor is
provided. Proof of purchase (original purchasing receipt) must be
provided
to Jade Bath in order to claim for warranty.
Nominal Diameter
G1/2
General Medium
Water
Water Pressure
0.05Mpa-1.0Mpa
Recommended Pressure
0.1Mpa-0.6Mpa
Temperature Range
4
°C - 90°C
STOP
ARRET
DO NOT RETURN THIS PRODUCT TO THE STORE
NE PAS RETOURNER CE PRODUIT AU GASIN
 
  
 
 
 
a 


a 

1-866-333-0555

l

A

2

Jade
11 900, J.J. Joubert,
Montreal, Canada H1E 7J4
Tel: (514) 832 0555
Fax: (514) 832 0554
www.jadebath.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Jade Bath 8011-01-10 Installation guide

Type
Installation guide
This manual is also suitable for

Jade Bath 8011-01-10 is a thermostatic rain shower faucet made of high-quality materials that ensure durability and longevity. It's simple to install, featuring adjustable S-connectors, decorative covers, and clear instructions. The faucet allows you to enjoy a relaxing and invigorating shower experience, thanks to its top shower and handle shower options. The multifunctional handle provides effortless control over water flow and temperature, while the security stop at 38℃ ensures safety during use.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI