2. HiB
  3. Toilet Roll Holder

HiB Toilet Roll Holder, Shelf Fitting Instructions

  • Hello! I've reviewed the fitting instructions for the HiB Toilet Roll Holder ACTRHCH01, Toilet Roll Holder ACTRHBK01, and Shelf ACCACH05. This document provides specific guidance on installation methods including drilling depths, suitable materials, and care instructions. I'm ready to answer any questions you might have about safely installing this product and maintaining its condition.
  • What type of drill bit should I use for drilling through tile?
    What should I do if I am fitting this to a tiled surface?
    What type of fixings are needed for plasterboard walls?
    What should I use to clean this product?
Fitting Instructions
FI#10 005 R200716 Ver No. 2.0 Oct 2020
Installation Guideline
Care Instructions
• Using a suitable drill bit, drill holes in the marked positions to a suitable depth. If drilling through tile, use a ceramic drill bit.
• Insert wall plugs level with the surface of the wall. If fitting to a tiled surface, wall plugs should be inserted below the tile surface to avoid
cracking. NB. For plasterboard walls, specialist fixings should be purchased, available from any DIY or hardware store.
• Fig.4 - Ensure the retaining screw is installed securely.
• Do not use abrasives or solvents when cleaning this product.
• Wipe off all water spillages as soon as possible using a so, damp cloth.
ACCACH05
ACTRHCH01
ACTRHBK01
/