2. Atdec
  3. AC-AP-UTH

Atdec AC-AP-UTH Installation guide

  • Hello! I'm here to help you with your Atdec Tablet Holder. I've reviewed the provided installation instructions, and I see this model is compatible with several mounting systems, such as Systema, Visidec, and Spacedec, plus VESA mounts. It supports tablets up to 15mm thick, 140mm wide, and 255mm tall, and can be oriented in portrait or landscape. Do you have any questions about the installation or device features?
  • What is the maximum tablet thickness this holder supports?
    What is the minimum width of the tablet supported?
    What is the maximum height of the tablet supported?
    Can the tablet be mounted in both landscape and portrait orientations?
Installation Instructions
Universal Tablet Holder
Step 1. Check components
Component Checklist
Hardware
IMPORTANT INFORMATION
Step 2. Attach tablet holder to VESA mount
Systema Visidec Focus Spacedec/Telehook
Step 3. Attach tablet to tablet holder
OR OR
AC-AP-UTH
! IMPORTANT - Install as per Installation Instructions
! This product is used to mount tablet devices only.
! This product is compatible with Atdec’s Systema, Visidec and
Spacedec range of monitor mounts. Also compatible with
100x100 VESA mounting plates.
! The maximum thickness of the supported tablet is 15mm (0.6”).
! The minimum width of the supported tablet is 140mm (5.5”).
! The maximum height of the supported tablet is 255mm (10”).
! Ensure your tablet is mounted centrally on the Universal Tablet
Holder for optimum stability.
! Ensure holder tabs do not interfere with buttons on your tablet.
! The manufacturer accepts no responsibility for incorrect
installation.
Check that you have received all parts against the Component Checklist.
Tablet can be mounted in Landscape
or Portrait orientations.
Universal Tablet Mount
2.5mm Allen Key
M4x15 Screw (x4)
3
2
1
1. Pull the top tab up
2. Position bottom
edge of tablet into
lower tabs
3. Push tablet flat
against the back
of the mount.
Allow the top tab
to retract over the
edge of the tablet.
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to the continuing product development, the manufacturer reserves the right to alter specifications without notice. Published 10/11/15 ©
/