Article Krossa 35 Shelf Assembly Instructions

Type
Assembly Instructions

This manual is also suitable for

Assembly Instructions
KROSSA
35" Shelf
VERSION 1.0
KROSSA 35" Shelf
ANTI-TIP KIT INVENTORY
ID DESCRIPTION QTY
BRACKET 1
M4 × 20MM SCREW 1
M8 × 51MM PLUG 1
M6 ×70MM SCREW 1
Page 2 of 4
30 min
3
TIME # OF PEOPLE DIFFICULTY
Hardware (B/D) to attach brackets to wall is designed
for drywall. To attach this unit to another type of wall,
consult with your local hardware store.
Serious or fatal crushing injuries can occur from furniture
tip-over. To help prevent tip-over:
Install tip-over restraint provided.
Do not set heavy objects on top of this product,
unless the product is specifically designed to
accomodate them.
Never allow children to climb or hang on mirrors,
shelves, consoles, or cabinets with doors and/or
drawers.
Use of tip-over restraints may only reduce but not
eliminate, the risk of tip-over.
WARNING!
ANTI-TIP RESTRAINT INSTALLATION
ANTI-TIP
Installation Required
REQUIRED TOOL
8MM / 5/16" DRILL BIT
REQUIRED TOOL
Page 3 of 4
1
Place unit in desired location
and mark on wall where hole
should be drilled.
KROSSA 35" Shelf
Attach the bracket into the underside of
the top shelf as shown in the illustration.
use screw (B) to attach the bracket into the
pre-drilled hole underside of top shelf.
!
Page 4 of 4
2
Drill hole into drywall, insert plug
(C), and attach unit to wall.
!
KROSSA 35" Shelf
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Article Krossa 35 Shelf Assembly Instructions

Type
Assembly Instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI