Page is loading ...
Assembly Instructions
KROSSA
Desk
VERSION 1.0
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
KROSSA Desk Page 2 of 9
30 min
3
PARTS INVENTORY
ID DESCRIPTION QTY
TABLE TOP 1
DRAWER TOP 1
DRAWER BOTTOM 1
LEFT LEG FRAME 1
RIGHT LEG FRAME 1
REAR SUPPORT BAR 1
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
WOOD DOWEL 4
M6 × 60MM BOLT 10
ALLEN KEY 1
FELT PAD 3
M6 × 30MM BOLT 8
M4 × 50MM SCREW 2
CRESCENT WASHER 4
TIME# OF PEOPLE DIFFICULTY
REQUIRED TOOL
All bolts at each step must be 85%.
Ensure desk is leveled before tightening
at 100% to avoid wobbling.
#
Page 3 of 9
1
KROSSA Desk
Take out plastic pin before pulling
out the drawer (B) and (C).
!
Take out top drawer (B) and bottom drawer (C) before
assembling the legs (D/E). Detach the following parts.
!
Opening pin
!
#
Page 4 of 9
2
KROSSA Desk
×2 ×3
#
Page 5 of 9KROSSA Desk
3
×5
#
Page 6 of 9KROSSA Desk
4
×3
#
Page 7 of 9KROSSA Desk
5
×2 ×2
Attach legs (E) and (D), and rear support bar (F).
first before secure table top (A) with screw (L).
!
×3
#
Page 8 of 9KROSSA Desk
×3
×4
6
Page 9 of 9
7
KROSSA Desk
Closing pin
!
/
