Article SKU16969 Assembly Instructions

Brand
Article
Model
SKU16969
Type
Assembly Instructions
Assembly Instructions
MYSEN
Bookcase
VERSION 1.0
Page 2 of 8MYSEN Bookcase
ASSEMBLY INSTRUCTIONS
Read these instructions carefully and keep for future
reference. Refer to parts inventory for guidance, and
ensure you have all pieces before starting.
When assembling, place all parts on a soft, clean, and flat
surface such as a carpet to prevent scratches.
If you’re having diculty, our friendly Customer Care
team is always here to help. Call us at 1.888.746.3455
during business hours, email [email protected] or chat
live at article.com.
PARTS INVENTORY
ID DESCRIPTION QTY
TOP PANEL 1
CENTER SHELF 1
BOTTOM SHELF 1
LEFT SIDE PANEL 1
CENTER PANEL 1
RIGHT SIDE PANEL 1
BACK PANEL 2
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
ALLEN KEY 1
18
LOCK WASHER 18
WASHER 18
WOODEN DOWEL 18
REQUIRED TOOL
15 min
1
TIME # OF PEOPLE DIFFICULTY
M8 × 40MM BOLT
Page 3 of 8MYSEN Bookcase
Page 4 of 8MYSEN Bookcase
1
× 2
×2
2
1
2
Page 5 of 8MYSEN Bookcase
4
3
× 2
× 4
×2
4
3
Page 6 of 8MYSEN Bookcase
6
5
6
5
Page 7 of 8MYSEN Bookcase
6
5
×4
×4
8
Page 8 of 8MYSEN Bookcase
8
7
×6
×6
Adjust levelers
as needed.
!
9
10
Children have died from furniture tipover.
To reduce the risk of furniture tipover:
• ALWAYS install tipover restraint provided.
• NEVER put a TV on this product.
• NEVER allow children to stand, climb or hang
on drawers, doors, or shelves.
• NEVER open more than one drawer at a time.
• Place heaviest items in the lower drawers.
20 min
3
TIME
REQUIRED TOOL
REQUIRED TOOL
8MM / 5/16" DRILL BIT
# OF PEOPLE DIFFICULTY
ANTI-TIP RESTRAINT INSTALLATION
Page 1 of 2
ANTI-TIP Installation
WARNING!
1010 Raymur Ave.
Vancouver, BC V6A 3T2
PARTS INVENTORY CONT.
ID DESCRIPTION QTY
BRACKET 2
M4 × 15MM SCREW 2
M8 × 51MM PLUG 2
M6 × 70MM SCREW 2
WASHER 2
Hardware (C/D) to attach brackets to wall is
designed for drywall. To attach this unit to another
type of wall, consult with your local hardware store.
Place unit in desired location and mark on
wall where holes should be drilled.
× 2 × 2
Drill holes into drywall, and attach unit to wall with appropriate hardware.
Page 1 of 2
1
2
ANTI-TIP Installation
Attach the bracket (A) into the underside of
the top shelf as shown in the illustration. use
screw (B) and washer (E) to attach the
bracket into the pre-drilled hole underside of
top shelf.
!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Article SKU16969 Assembly Instructions

Brand
Article
Model
SKU16969
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents