Teraflex 001744000 Installation guide

Fits TJ Wranglers (‘97-newer) and

requires use of a TeraFlex rear track

bar bracket or equivalent.

Instructions:

1. Disconnect stock track bar from upper and lower track bar

mounts.

2. Connect the frame end of the adjustable rear track bar rst

using the hardware included.

3. Connect the lower end of the adjustable rear track bar to the

rear track bar bracket using the included hardware. The product

is shipped at stock length for use on stock vehicles or vehicles

with three-inch lifts with a rear track bar bracket.

4. Torque bolts to 70 ft. lbs.

Four-Inch Suspensions:

Lengthen the adjustable rear track bar one, full rotation. One

rotation is equal to 0.1 inch.

Installation Guide

for the Rear Adjust-

able Track Bar

Part #001744000 (TBART)

Tera Manufacturing, Inc.

5251 South Commerce Dr. Murray, Utah 84107

Phone/801.288.2585 Fax/801.713.2313

www.teraex.biz

Components:

1 Adjustable rear track bar

2 1/2-inch bolts

2 1/2-inch nuts

2 Flat washers

2 Lock washers

INSTALLATION GUIDE