Broadlink RM Mini 3 User manual

Broadlink
Brand
Broadlink
Model
RM Mini 3
Type
User manual
Add Device
User Guide
BELL
4:21 PM
100%
客厅空调
TV
RM
SP
RM mini 3
a4:62:07:18:91:22
A1
f4:22:0d:a3:51:f8
Smart plug
Back
Device list
b4:42:0d:10:21:f4
Smart plug
04:02:58:10:28:44
Sensor
NEW
New device Add new device;
Local Connect device with the Wi-Fi smart phone
connected;
Remote Control online device by remote;
Offline Device is offline and it is out of control.
Please check the network connection.
NEW
Remote panel
icon
Please enter
appliance brand
or panel code to
perform search
Add remote
Air conditioner
TC
Gesture Control
User-Defined
Audio
Set Top Box
Back
Choose a remote template
Add remote
Add scene
Add device
Device list
①
①
Living room scene
Control panel
②
Blue indicator flashes quickly:
Waiting for configuration (device is under factory state
or reset). Under this circumstance, you can tap ‘Add
device’ in APP and it guides you to finish the
configuration.
Network is down, power supply is down and then
recovers, or during the configuration process.
Transmitting infrared signal (it occurs when learning the
infrared codes or controlling appliance).
Instruction of LED indicatoror
Universal Remote
Address: Room 106, No.611 Jianghong Road, Binjiang
District, Hangzhou, Zhejiang, China( 310052 )
Facebook Twitter Linkedin
Hangzhou Gubei Electronics Technology Co., Ltd.
Blue indicator flashes slowly:
White indicator flashes once:
Do not use non-ASCII characters in Wi-Fi name or
password. It may cause configuration failure. The device
supports Wi-Fi of 2.4G 802.11 b/g/n only.
Please place the device on open place. Please point
remote to the top of the device during learning and we
suggest the distance is less than 1m.
Please configure the device according the user guide. If
you encounter problems, please contact our
authorized distributors or our support team.
All the technical details are subjected to the actual
product performance.
Note
Website: www.ibroadlink.com
Service: [email protected]
Hotline
FCC ID: 2ACDZ-RMMINI3-RM
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference, and This device
must accept any interference received, including interference that
may cause undesired operation.
NOTE : Any changes or modifications to this unit not expressly
approved by the party responsible for compliance could void the
user's authority to operate the equipment.
FCC Radiation Exposure Statement
Product name : Universal Remote
Model : RM mini 3
Input Power : 5V DC 1A ( Micro USB )
Infrared Frequency : 38K
Working Temperature : 0 ~ 50°C
Working Humidity : ≤ 85%
Wi-Fi Frequency : 2.4GHz 802.11b/g/n
Standby Power : ≤ 0.88W
Infrared Direction : Multiple-direction infrared
Infrared Range : ≤ 8m ( Typical )
Size : 55 x 55 x 64.5mm
Net Weight : 95.5g
Specifications
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between
the radiator and your body.
FCC WARNING:
Package Content
USB cable
x 1
User guide
x 1
RM mini 3
x 1
Front Back
LED indicator
Reset button
Power input
(Mirco USB)
After opening package, please check contents as below
Step
2
User Guide
Step
1
Install APP
Scan the QR code on package to download and install
APP, or visit http://upgrade.broadlink.com.cn/getapp/
from web browser on phone to download APP manually.
Configuration mode
Indicator flashes quickly
about 2-3 times/sec
Open the APP
RM mini 3
e-control
Step
3
Add device
Step
4
Control panel
If configuration failed, please reset the device and
re-configure
User guide
Tap to add remote control panel;
Tap to add scene;
Tap to add device;
Tap to view added devices.
Reset device: Long press on reset button with a slim
needle for more than 5s until the indicator flashes
quickly.
Reset device
Connect to power
①
Connect smart
phone to Wi-Fi
②
③
Connect to power and set RM mini 3 to config mode
(indicator flashes quickly).
Please choose the proper adapter which output power
is 5V DC and ≥ 1A for RM mini 3.
Please place the device on open place. Please point the
remote to the top of the device during learning, and we
suggest the distance from the device to remote should
be less than 1m.
Wi-Fi routerSmart phone
USB power
source
BELL
4:21 PM
100%
Enter Wi-Fi password to perform
quick configuration
Back
BroadLink
Please enter Wi-Fi password
Add device
AP config
Tap to enter Wi-Fi password
Configure
Wi-Fi SSID your
smart phone connected
BELL
4:21 PM
100%
What do you want to do to this device?
Delete
Cancel
Living room scene
A1Aircon TV Smart Plug
Control panel
Add remote
Add scene
Add device
Device list
Main menu
Scene icon
Device shortcut
Function menu
1
Remote panel
shortcut
Long press
2
3
4
1
2
3
4
  • Page 1 1
  • Page 2 2

Broadlink RM Mini 3 User manual

Broadlink
Brand
Broadlink
Model
RM Mini 3
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents