Dale Tiffany STA11096 Operating instructions

ASSEMBLY INSTRUCTIONS:

Item No: STA11191

1. Remove all parts and carefully place on a level

surface.

2. Screw the socket-threaded rod (C) through the base

panel (B), secure panel in place using the provided

nuts and lock washers.

3. Attach columns (D) on an upright position onto base

panel (B) by screwing the legs (A) through the base

panel (B).

4. Once columns (D) are on base panel (B), slide side

panels (E) between the columns.

5. Insert bulb into bulb socket.

6. Attach top panel (G) onto columns and secure in

place using the screws (F) provided.

7. Place the center glass panel on the top panel (G).

Uses (1) Maximum 60WATT Type “A” Bulb

(Bulb not included)

Cleaning of your lamp

Unplug lamp, wipe with damp cloth.

Do not use abrasives.

*SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Made in China Revision 08/31/11

FOR RETURN SHIPPING PURPOSES:

PLEASE RETAIN ORIGINAL PACKAGING

TO MINIMIZE DAMAGE.

Page is loading ...

This manual is also suitable for

Download PDF