SmartyCam – stand alone version
Start up guide
Release 1.01
www.aim-sportline.com
SmartyCam stand alone
1. Install SmartyCam
Place the camera in the desired position and fix it with the proper brackets. Use the
display to check the framing. Please note: SmartyCam can be installed also upside
down.
2. Calibrate the accelerometer (paragraph 6.4.2.2 of SmartyCam user manual)
3. Enable “START” option (paragraph 6.5.2 of SmartyCam user manual)
Enabling this option of “REC STRATEGY” page (MENU>>SETTINGS>>REC
STRATEGY), recording starts when acceleration overcomes the threshold value
fixed setting “AutoRec by Acc”: low (0.2 G), med (0.4 G) and high (0.8 G).
When SmartyCam detects no acceleration stop recording is delayed of the time
period set in “STOP” option, bottom of “REC STRATEGY” page
(MENU>>SETTINGS>>REC STRATEGY): 5, 20 or 6 sec, 2 or 5 min.
That’s all: now the first video can be shoot
SmartyCam can do a lot of things like showing lap time. Just fix the beacon following this
path “MENU>>LAP MANAGEMENT”: press “Fix” in the point where the lap beacon is
wished. SmartyCam records a lap each time it crosses that point.