Aastra 68622 Datasheet

Brand: Aastra

Model: 68622

Type: Datasheet

This manual is also suitable for

RFP (L)35 IP

SIP-DECT indoor base station

The Radio Fixed Parts RFP (L)35 IP is connected directly

to the LAN like a VoIP device, while using the benets of

established DECT technology for radio transmission.

This ensures full compatibility with cordless DECT terminals,

which are available as system telephones and standard GAP

terminals. The «L» versions come prelicensed for installations

up to 20 RFPs, the technical specication is the same.

The VoIP solution is particularly suitable for branch offices

that are connected to a company’s headquarter via IP link.

The enrolled cordless handsets act as normal company exten-

sions, which means the sta can always be reached on their

telephone numbers, regardless of whether they are currently

in the headquarter or in one of the branch oces.

Using shared IP connections for data and telephony cuts

down on the need for additional infrastructure and therefore

reduces costs.

Connections of RFP (L)35 IP

RFP (L)35 IP

Features

DECT

 All 120 (in America 60) DECT channels

supported for maximum use of the

DECT capacity

 8 simultaneous voice channels per RFP,

4 additional channels for switching

purposes

 GAP standard supported

 Connection handover in line with the

GAP standard

 DSAA authentication between base

and handset

 Support of DECT encryption

 Cordless system telephones can use all

features oered by the OpenCom 100,

1000 and SIP-DECT

 Integrated DECT dipole antenna

 DECT XQ for minimization of interfe-

rences in reecting environments

Service and Installation

 3 LEDs signalling the current operating

state

 Central conguration

 Central system journal

 Central cluster administration

 Local boot from Flash Memory

 Wiring alternatively from below (cable

duct) or from above (suspended cei-

ling)

 RFP (L)35 IP can be connected via RJ 45

connector

Ethernet

 Connection via Ethernet 100/1000

BaseT

 Power supply in line with Power over

Ethernet standard IEEE 802.3af, class 3

 IPv4

VoIP

 VoIP connection using RTP / RTCP

protocol

 G.711 / G.722 / G.729AB

codec de-

pending on required voice quality and

available bandwidth

 Quality of service supported by Di-

serv / ToS Flag

 Adaptive jitter compensation

 Echo cancellation / suppression

 Voice activity detection and comfort

noise generator

Technical data

 Power supply:

• Power over Ethernet IEEE 802.3af,

class 3 or

• 230 V AC adapter

 Ambient temperature:

-5°C to +45°C

 Relative humidity:

5 to 95% (non-condensing)

 Storage temperature:

-40°C to +70°C

 Current consumption: 120mA

 Type of ingress protection: IP 20

 Flame resistance UL94 V0-5VB

 Wall-mountable

 Colour: ice grey

 Weight: 417 g (without AC adapter)

 Dimensions (W x H x D):

195 x 200 x 30 mm

Part numbers RFP (L)35 IP

RFP 35 IP

(only for EMEA)

68637

RFP L35 IP

(only for EMEA)

68622

AC adater for EMEA, UK,

Australia and NA

87-00002AAA-A

AC adater forEMEA, UK,

Australia

68744

(1) Additional licence required

nologies Limited in the United States, Canada, European Union and other countries. SIP-DECT is a registered trademarks of Aastra

Deutschland GmbH. Picture similar to product. The right for technical modications is reserved.

Reference 04/2013

Aastra Technologies Limited

155 Snow Blvd.

Concord, Ontario Canada

L4K 4N9

www.aastra.com

Aastra 68622 Datasheet

Brand: Aastra

Model: 68622

Type: Datasheet

This manual is also suitable for

Download PDF

report

Aastra 68622 Datasheet

This manual is also suitable for

Aastra 68622 Datasheet

Related papers

Other documents