9A435001
Installation Instructions
INS-9A435001 (Rev. B)
Midmark Corporation | 60 Vista Drive | PO Box 286 | Versailles, Ohio 45380-0286 | USA | midmark.com
Insert (2) screws into accessory mounting bracket.
Fasten and tighten screws into worksurface. If using
a kidney worksurface, see Pict. B for placement.
Insert (1) screw through hole in
coiled powered cord (see Pict. A)
and secure to worksurface.
1
2
Pict. B
Pict. A
Accessory
Mounting
Bracket
insert screw here
(apply loctite to screw
before inserting into
coiled power cord)
Tools required:
Phillips Head Screwdriver
Loctite (Brand #99394 epoxy)
Parts Included:
(1) Cord Mounting Bracket Assembly
(1) Coiled Powered Cord
(1) 1/4-20 x 1” Long Pan Head Phillips Drive Machine Screw
(2) #10 x 3/4” Long Pan Head Recex Low Root Screws
