MD Sports Blain's BL44123-14 Assembly Instructions Manual

Brand: MD Sports

Model: Blain's BL44123-14

Type: Assembly Instructions Manual

MODEL: BL44123-14

Blain's

ASSEMBLY INSTRUCTIONS

ATTENTION

Contact

MD Sports

Customer Service

DO NOT RETURN

TO THE STORE

Toll Free: 877-852-8164

* For additional resources and Frequently

Asked Questions, please visit us at

themdsports.com

www.themdsports.com

1444123

(Continued on the next page.)

NOTICE!

This product is covered by a limited warranty that is effective for 90 days from the date of purchase. If, during the limited warranty

period, a part is found to be defective or breaks, we will offer replacement parts at no cost to you, the customer. The only exceptions

to the warranty include mainframes, table tops, playing surfaces, batteries or tools.

The above warranty will not apply in cases of damages due to improper usage, alteration, misuse, abuse, accidental damage or

neglect.

This Limited Warranty gives you specific legal rights and you may also have other rights which vary from one State (province) to

another.

A PURCHASE RECEIPT (or other proof of purchase) will be required before any warranty service is initiated. For all

requests for warranty service, please feel free to contact our

Consumer Service Department at :

TOLL FREE: 877-852-8164

WEBSITE: www.themdsports.com

Please be aware of your product’s Limited Warranty for the return/refund policy from the store, We, at Medal Sports, can not handle

the product which is out of product’s limited warranty since we only provide available parts. Thank you!

PLEASE CONTACT US BEFORE RETURNING

THE PRODUCT TO THE STORE.

LIMITED 90 DAYS WARRANTY

STAPLE YOUR RECEIPT HERE

1 - Please leave your name, address, phone number, model number, parts needed on the answering machine if there is no attendant.

Failure to do so will result in a delay in shipping parts to you.

2 - Please review the replacement parts list and make sure that you have all of your parts before beginning assembly.

For questions that may arise or for missing/damaged parts, please contact us.

3 - Since you build all tables upside down, please inspect tabletops or playing surfaces right away before putting together, all damaged

table tops/playing surfaces need to be returned to the store. Please contact with retailer for their return policy.

www.themdsports.com

1444123

(Continued on the next page.)

Phillips Screwdriver - Not Included

Standard (Flat Head Screwdriver) - Not Included

Wrench - Included

Allen Key - Included

CAUTION!

Electric Screwdrivers may be helpful during assembly; however, please set a low torque and use

extreme caution.

1 - This product is intended for INDOOR use only.

2 - Please do not sit, climb or lean on the product.

3 - Please do not drag the product when moving it in order to avoid damaging the legs.

4 - Please only use spray furniture polish to clean the exterior surfaces of the product.

5 - This is not a child's toy, adult supervision is required for children playing this game.

Power Tools

- Set Low Torque

High Torque

over tightened

WARNING:

Adult Assembly Required.

WARNING:

CHOKING HAZARD 

TOOLS REQUIRED

ASSEMBLY TIPS

IMPORTANT NOTICE!

Strong Adults Needed

No Children in

Assembly Area

Keep away from pets

Do not use or keep product

outdoors. For indoor use only.

No wet/humid conditions.

X 4

1 - Please read the instructions carefully, and follow all assembly, operation and safety instructions properly in order to avoid

damage or injury. For the assembly, at least four adults are required.

2 - Some figures or drawings may not look exactly like your product. Please read and understand the text before beginning each

assembly step.

10 11

13 14 15

2 3 4

Table Surface - 1

Table Surface - 2 Leg Caster Frame

Linkage Tube - B

Plastic Corner

Linkage Tube - A Bottom Support

Tube

Side Panel

50.75”

End Panel

56”

x1 x1 x4 x2

6 7 85

x2 x4

x4 x4 x2

18 19 20

Gravity Lock

A10

6mm Washer

x68

Allen Key

Spacer

M6 Nut

x34

M6x50mm Bolt

x16

“T” Washer

M6x65mm Bolt

M6x35mm Bolt

x14

M5x16mm Screw

x32

M4 x 12mm Screw

x61

Caster with Lock

Net

Net Post

M10 Nut

Wrench

Safety

Strap - Long

Safety

Strap - Short

Big Bracket

Small Bracket

Handle

Logo Panel

1444123 PARTS LIST

www.themdsports.com

1444123

(Continued on the next page.)

FOR FIG. 1 FOR FIG. 1 FOR FIG. 4 FOR FIG. 7

FOR FIG. 5 FOR FIG. 7 FOR FIG. 10 FOR FIG. 8

FOR FIG. 6 FOR FIG. 6 FOR FIG. 6 FOR FIG. 8

FOR FIG. 8 FOR FIG. 7 FOR FIG. 7 FOR FIG. 13

FOR FIG. 13 FOR FIG. 2 FOR FIG. 2 FOR FIG. 3

FOR FIG. 3 FOR FIG. 3 FOR FIG. 2, 3, 6, 8 FOR FIG. 3

FOR FIG. 4, 5, 7, 8, 9, 10 FOR FIG. 4, 5, 7, 8, 9, 10 FOR FIG. 4, 5, 10 FOR FIG. 10

FOR FIG. 7, 8, 9 FOR FIG. 10

X 1

1444123 PRE-INSTALLED PARTS

Leg Cap

Linkage Tube

Cap

Caster Frame

Cap

P1 P2

x12

FOR FIG. 4 FOR FIG. 7 FOR FIG. 10

www.themdsports.com

1444123

(Continued on the next page.)

ASSEMBLY INSTRUCTIONS:

1. Find a clean, level place to begin the assembly of your Product.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the Parts list pages.

Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.

FIG. 1

Player

Center

Note: Playfield graphic should be

face down when assembling.

X 1

X 2

X 3

www.themdsports.com

1444123

(Continued on the next page.)

X 2

X 32

X 4

X 8

Player

Center

Player

Center

FIG. 2

FIG. 3

FIG. 3A

FIG. 3B

FIG. 2A

FIG. 2B

FIG. 3C

X 4

X 8

X 1

X 4

A10

www.themdsports.com

1444123

(Continued on the next page.)

X 4

FIG. 4

FIG. 5

X 2

X 8

X 16

X 1

X 8

A10

Player

Center

Player

Center

FIG. 4A

FIG. 5A

X 1

A10

X 42

X 2

X 4

X 2

X 8

X 16

X 4

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 6

FIG. 7

Player

Center

Note: Make sure all Aprons are

inside the Plastic Corners.

Note: Be sure that the holes are

on the outside.

FIG. 7A

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 8

Note: Note the position of the

Gravity Lock. (See inset for details).

X 2

X 4

X 2

X 1

A10

Note: Please make sure

the casters are locked.

Lock

Open

X 8

X 2

X 8

X 4

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 9

X 1

A10

FIG. 9A

Note: Please leave approximately

10mm distance between table

centers.

Note: At least four adults are

required to move the table halves

for safety.

FIG. 8 Assembly

X 4

X 12

X 8

X 4

Now go back and tighten all connections.

X 16

X 8

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 10

FIG. 10A

X 1

A10

X 4

Turn table on its side

Fold table tops in

NOTE: Lift off of the floor and

turn in the air.

At least four adults

Lock Wheels

DO NOT lean the table on it's legs!

Warning

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 11

FIG. 11A FIG. 11B

FIG. 11C FIG. 11D

FIG. 11E FIG. 11F

Note : Place on all 4 wheels at once

CAUTION: Four strong adults are recommended to turn the table over as shown.

B. FOLD LEGS AND

TABLE HALVES AND

LOCK IN PLACE

E. SET TABLE DOWN EVENLY

ON ALL WHEELS, TO PREVENT

DAMAGING THE LEGS

A. TURN TABLE

ON ITS SIDE

C. LIFT TABLE AND

TURN IN THE AIR

D. DO NOT LEAN

TABLE ON ITS LEGS!

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 11G

FIG. 12

FIG. 12A

FIG. 12B

Note: To unfold the table - First release the

Gravity Lock (#13) and Safety Strap (#18 & #19).

See FIG. 12A and 12B.

X 1

X 2

Note: Pull the handle and the table top, and slowly lower the table to

the floor. See FIG. 12C.

Handle

www.themdsports.com

1444123

(Continued on the next page.)

FIG. 12C

FIG. 13

FIG. 13B

FIG. 13A

Note: Slide the Net (#16)

onto the Net Post (#17).

Note: When the table is in its storage position, always attach the safety

strap to prevent the sides from falling.

YOU ARE NOW READY TO PLAY!

FIG.14

3. Engage the Wheels Lock.

4. Folding the table - First fold the side of the table without the net post. Hold the handle securely and lift the table.

Make sure the Gravity Lock (#13) is locked. Attach the Safety Straps (#18, #19) together to prevent the sides from

falling. Repeat for the other side.

5. To unfold the table - First release the Gravity Lock (#13) and Safety Strap (#18 & #19). Then pull the handle and

the bottom of the outer leg, and slowly lower the table to the floor.

Reverse

Safety Straps

Gravity Lock

www.themdsports.com

1444123

(The last page)

FIG. 14

FIG. 14A

FIG. 14B

FIG. 14C

FIG. 14D

Note: Note: Please make sure

the gravity lock is locked

when folded.

MD Sports Blain's BL44123-14 Assembly Instructions Manual

MD Sports Blain's BL44123-14 Assembly Instructions Manual

MD Sports Blain's BL44123-14 Assembly Instructions Manual

Related papers

Other documents